Home » Haier Manuals » Air Conditioners » Haier HBU-14HC03 » Manual Viewer

Haier HBU-14HC03 User Manual

Haier HBU-14HC03 Manual

View all Haier HBU-14HC03 manuals

Add to My Manuals
Save this manual to your list of manuals

Haier HBU-14HC03 manual content summary:

Haier HBU-14HC03 | User Manual - Page 1
CASSETTE AIR CONDITIONER Operation Manual AB142ACBBA AU142AFBBA (HBU-14HC03/R1) No.0010571987 Please read this manual carefully before using the air conditioner Please keep this manual properly for future use
Haier HBU-14HC03 | User Manual - Page 2
Contents Cautions 1-2 Main points of operation 3-4 Name of Each part 5-6 Safety cautions 7-8 Gaide to operation 9-14 Maintenance 15 Trouble shooting 16-18 When trouble happens 19 Customer Need to know 20 Installation Tools 21 Installation Procedures 22-31 Installation Procedures,Check and
Haier HBU-14HC03 | User Manual - Page 3
waste materials collecting centers and waste paper disposal services nearest to your house. Safety Instructions and Warnings Before starting the air conditioner, read the information given in the User's Guide carefully. The User's Guide contains very important observations relating to the assembly
Haier HBU-14HC03 | User Manual - Page 4
any other things into the inlet/outlet and swing louver. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. 3. If the fuse on PC board is broken please change it with the type of T. 3.15A /250VAC. 4. The wiring method
Haier HBU-14HC03 | User Manual - Page 5
for remote control on the control panel of the indoor unit. After the peripheral equipment have been installed in accordance with the instruction manual of the selected remote control detector, the air conditioner will be computerized and controlled from a faraway place. Note: Air conditioner has
Haier HBU-14HC03 | User Manual - Page 6
Main points of Operation Wait a Prevent Cool Air Blowing Off minute In heating mode,the indoor fan will not run immediately after the unit starts to prevent the cool air blowing off. Defrosting Function In heating mode, when frost formed on the outdoor heat exchanger, the air conditioner will
Haier HBU-14HC03 | User Manual - Page 7
Name of Each Part Indoor unit Swing louver (Air flow direction can be adjusted by using the SWING button on the remote controller) Electrical Components Case Air Inlet Grille Air Filter (Inside of the Inlet Grille) outdoor unit Air Inlet (side) Air Inlet (back) Conneting pipe and electrical
Haier HBU-14HC03 | User Manual - Page 8
Name of Each Part 12 13 14 15 16 17 11 10 9 MODE AFN SWNIG OTUA 8 TEMP 18 7 CLOCK SET 19 6 20 TES MTIER SLEEP 5 % ROM C 21 N O F FO MA MA MP MP FLTRIEERSET RESET 2 23 24 ON/OFF 4 25 3 26 2 1 1.ON//OFF button 2.Temperature display 11.Humidifying state display
Haier HBU-14HC03 | User Manual - Page 9
may result in machine damages or endanger the userípersonal safety. INSTRUCTION: This information can ensure the correct operation of the machine. Be when needed. If the air conditoner is transferred to the new user, this manual should be as well transferred to the new user. WARNING If any abnormal
Haier HBU-14HC03 | User Manual - Page 10
Safety Cautions No goods or nobody is permitted to be placed on or stand on outdoor unit. The falling of goods and people may cause accidents. WARNING Donít clean air conditioner with water. Otherwise may cause shock. Don't operate the air conditioner with damp hands. Otherwise will be shocked.
Haier HBU-14HC03 | User Manual - Page 11
Guide to Operation Fan Operation ROOM MA MODE FAN SWNIG 2 TEMP 3 CLOCK SET TMIER SLEEP FLITERESET RESET 1.Unit start Press ON/OFF button, unit starts. Previous
Haier HBU-14HC03 | User Manual - Page 12
Guide to Operation AUTO run, COOL , HEAT and DRY Operation MODE FAN 4SWNIG 2 TEMP CLOCK 3SET SET TMIER SLEEP (1) Unit start Press ON/OFF button, unit
Haier HBU-14HC03 | User Manual - Page 13
Guide to Operation Sleep Function SET OFF AM AM MODE FAN SWING TEMP CLOCK TIMER SET SLEEP FILTER RESET RESET ON/OFF Before using this function,
Haier HBU-14HC03 | User Manual - Page 14
Guide to Operation Timer On/Off Before using TIMER function, calibrate the clock first (referring to page 4). When you wake up in the morning, before going
Haier HBU-14HC03 | User Manual - Page 15
Guide to Operation Timer On-Off ROOM ON OFF MA PM MODE FAN SWNIG TEMP CLOCK 3 6 SET TMIER SLEEP 5 2 4FLITERESET RESET ON/OFF 1 (1)After unit start,
Haier HBU-14HC03 | User Manual - Page 16
Guide to Operation Filter Up/Down Filter Up/Down ROOM ON OFF MA PM MODE NAF NSWGI EMTP COLCK 3 TES 6 MREIT PELS 5 2 4RESTLEFTIR TESR ON/OFF 1
Haier HBU-14HC03 | User Manual - Page 17
Maintenance Clean the unit Turn off the power supply switch Do not touch with wet hand. Do not use hot water or volatile liquid ON OFF The 4 fixed bolts must be loosed as shown in the figure by arrow if they are bolts, the method is that: push the blots inward till to another edge. Fixing nolt
Haier HBU-14HC03 | User Manual - Page 18
Troubleshooting Seasonal Reserve Post-season Care Operate the unit with FAN mode on a fair day for about half a day to dry the inside of the unit
Haier HBU-14HC03 | User Manual - Page 19
Troubleshooting The followings are not malfuncition Water flowing sound is heard Hua Hua When the air conditoner is started, when the compressor starts or stops during
Haier HBU-14HC03 | User Manual - Page 20
Troubleshooting following things about your air conditioner before making a service call. Unit fails to start. Is the power supply trouble of the drainage system E1 The trouble of the room temp. sensor E2 The trouble of the pipe temp. sensor E5 The trouble of the overload current E8 The trouble
Haier HBU-14HC03 | User Manual - Page 21
When trouble happens Insufficient cooling or heating The operation controller adjusted as required Air filter too dirty ? Horizontal swing louver upward ? (in HEAT mode) Any obstacle exists
Haier HBU-14HC03 | User Manual - Page 22
conditioner work well. Be careful not to scratch the surface of the case during moving the air conditioner. Please keep the installation manual for future reference when maintenance and changing installation place. After installation ,please use the air conditioner according to the specification in
Haier HBU-14HC03 | User Manual - Page 23
13. Refrigerant oil Standard accessories The following parts mentioned in this manual are the installation accessories we prepared. Symbol Parts Name No. Accessory parts Screw 12 4 13 Steel nail cement 8 14 Pipe supporting plate 1 15 Drain hose 1 F Gypsum powder 16 Main pipes 1 21
Haier HBU-14HC03 | User Manual - Page 24
Installation Procedures 1. Remove upper part of wire controller Remove upper part of wire controller by press. PCB is mounted on lower part of wire controller, be careful not to damage it. Upper part of wire controller Lower part of wire controller 2. Install wire controller (1) For exposed
Haier HBU-14HC03 | User Manual - Page 25
Installation Procedures 4. Indoor unit wiring Hint Connect terminals (A,B,C,D) on lower When make wiring, please keep part of wire controller to terminals a(Adi,stance between wires and B,C,D) on PCB of indoor unit. power supply cord. wiring from here AB CD Lower part of wire controller Wire
Haier HBU-14HC03 | User Manual - Page 26
Installation Procedures Installation of Outdoor Unit Selection of installation place Place strong enough to support unit weight, and will not cause vibration and noise. Place where discharged wind and noise do not cause nuisance to the neighbors, and is sufficiently
Haier HBU-14HC03 | User Manual - Page 27
place where destructive gas (such as sulfuric acid gas) or pungent gas (thinner and gasoline) concentrates and retains. (6) Place strong enough to support the unit weight. (7) No expensive articles such as television and piano below indoor unit. (8) Enough space for maintenance. (9) Place more than
Haier HBU-14HC03 | User Manual - Page 28
Installation Procedures (3) Install a suspending bolt To support the unit weight ,anchor bolt should be used in comparator or PVC tube with water.(If unit is tilting against the direction of water drainage,problem may occur on floating water leakage.) Nut (Prepare in feild) In the case of ceiling
Haier HBU-14HC03 | User Manual - Page 29
Installation Procedures 3.Installation of water drainage pipe (1) Install water drainage pipe Pipe diameter shall be equal or larger than that of connecting pipe (Pipe of polythene; size: 25mm; O.D.: 32mm ) Drainpipe should be short, with a downward slope at least 1/100 to prevent air bag from
Haier HBU-14HC03 | User Manual - Page 30
Installation Procedure 4. Installation of Ornament Panel Install ornament panel on indoor unit (1) Check whether indoor unit is horizontal with leveler or polythene pipe filled with water , and check that the dimension of the ceiling opening is correct. Take off the lever gauge before install the
Haier HBU-14HC03 | User Manual - Page 31
Installation Procedures Piping Connection Flare connection Indoor Unit Gas pipe 3-way valve Outdoor unit Liquid pipe (1) Dimension of connecting pipe 2-way valve Flare connection Gas pipe Liquid pipe 15.88mm 6.35mm Fit the nut on and fasten 90 + 0.5 (2) The maximum length and drop height
Haier HBU-14HC03 | User Manual - Page 32
anticlockwise 90 degree. After 6 seconds later, close the 2-way valve and male the inspection of gas leakage. 3 Close 2-way valve 90 90 3-way valve Service port 4 90 for 6 sec. 5 No gas leakage? 6 In case of gas leakage, tighten parts of pipe connection. If leakage stops, then proceed 6 steps
Haier HBU-14HC03 | User Manual - Page 33
Installation Procedures Electrical Wiring Cautions: Use copper wire only.Parameters of connecting line : H07RN-F 3G 2.0mm2 ,H05RN-F 2X0.75mm2 for cooling and heating type machine. Power supply :1PH,220-230V~,50Hz, connect from inside. Wiring methods: 1.Wiring method of ring termianl For connecting
Haier HBU-14HC03 | User Manual - Page 34