Haier HBU-14HC03 User Manual - Page 15

Guide to Operation Timer On-Off ROOM ON OFF MA PM MODE FAN SWNIG TEMP CLOCK 3 6 SET TMIER SLEEP 5 2 4FLITERESET RESET ON/OFF 1 (1)After unit start, select your desired operation mode. Operation mode will be displayed on LCD. (except for Timer, Sleep, Swing) (2)TIMER mode selection Press TIMER button to change TIMER mode. Every time the button is pressed, display changes as follows: ON OFF M A 12:0 M P 12:0 TIMER ON ON OFF BLANK M A 12:0 M P 12:0 TIMER OFF TIMER ON-OFF Select your desired TIMER mode (ON or OFF) At this time the ON will flash. (3)Timer setting Press TIME button. Every time the button is pressed, time increases 10min.If button is kept depressed, time will change quickly. Every time the button is pressed, time decreases 10min.If button is kept depressed, time will change quickly. Time will be shown on LCD. It can be adjusted within 24hours. AM refers to morning and PM refers to afternoon. (4) Time confirming for TIMER ON After time setting, press TIMER button to confirm. "ON" stops blinking, While "OFF" starts blinking. Time displayed: Unit starts at X hour X min. (5)Time setting for TIMER OFF Follow the same procedures in "Time setting for TIMER ON". (6)Time confirming for TIMER OFF After time setting, press SET button to confirm "OFF" stops flashing. Time displayed: Unit stops at X hour X min. To cancel TIMER mode Just press TIMER button several times until TIMER mode disappears. According to the Time setting sequence of TIMER ON or TIMER OFF, either Start-Stop or Stop-Start can be achieved. 13