Haier HBU-14HC03 User Manual - Page 23

Installation Tools Installation tools Following in the list are the accessories The installation tools listed in the supplied with the unit,which can be used following sheet can be used as required. as required 1. Screw driver 2. Hacksaw 3. Drill with a diameter of 60mm 4. Inner hexagon spanner,shifting spanner 5. Spanner (14, 17, 19,24,27mm) 6. Pipe cutter 7. Pipe expander 8. Knife 9. Pincers 10. Leakage detector or soapy water 11. Band tape 12. Scraper 13. Refrigerant oil Standard accessories The following parts mentioned in this manual are the installation accessories we prepared. Symbol Parts Name No. Accessory parts Wire controller (signal wire) 1 F N F ** ** ** ** ** ** ** ** ** ** * ** C O O **** ** * * / * * 2 Wire clamp Qty. 1 6 Heat 3 insulation 1 30x100mm sheathing Heat 4 insulation 1 35x120mm sheathing 5 1 for cooling and Drain elbow heating mode unit None for cooling only mode 6 Piping hole cover 1 7 Rubber cushion 4 8 Connecting wire 2 for cooling and heating mode unit 1 for cooling only mode 9 Refrigerant oil *** 1 A Adhesive tape 10 Plastic clip 1 B Pipe clamp C Connecting hose D Drainage hose E Non-hydroscopic heat insulating material 11 Putty 1 Blastic cap 4x25 Screw 12 4 13 Steel nail cement 8 14 Pipe supporting plate 1 15 Drain hose 1 F Gypsum powder 16 Main pipes 1 21