Haier HWM5TL User Manual - Page 12

English Moving & Vacationing • Turn off water supply faucets and disconnect hoses. Drain water from all hoses. This will prevent damage due to water leakage if the hoses accidentally get ruptured or they become loose. • Disconnect electrical plug. • Dry inner wash tub. If moving washer, disconnect drain hose. • Turn the leveling legs clockwise all the way in. • To prevent mold or mildew, leave door open so moisture inside machine can evaporate. • Reinstall the foam base/styrofoam at the bottom to prevent internal parts from shaking when the washer is being moved to another location. This is used to secure the washer from shipping damage due to vibration and shock. Storage of Your Washer • This appliance must be stored at room temperature. • If you just got delivery of this appliance when outside temperature is below freezing, do not operate until this appliance has adjusted to room temperature. • Do not install or operate this appliance in an area where room temperature is below freezing. 17 English Selecting Wash Cycle: When you turn the power "ON", the machine will set the standard wash program to "Normal" wash position. You will see the red light lit up at both Normal wash cycle and Wash Cycle Mode position. pan r --7 PA. sum_ c•cLe For your convenience, you can select from four fabric care wash cycles: Heavy, Normal, Gentle and Quick Wash. Select the appropriate cycle based on the fabric type. If you want to select your desired option at this time, use down arrow ( Y ) to select the proper wash cycle for your load. Heavy Cycle: This is used for work & play, household linens and heavily soiled cotton clothes. With a heavy wash speed, the agitator moves faster and mightier, the soak time is longer than normal. This cycle is approximately 97 to 103 minutes. Note: The soak time will takeapproximately 35 minutes in this cycle.lf you do not want to select the "soak" option in order to wash lightly soiled items faster when using this cycle,select "Process Mode" by pressing left arrow (-4) on select button. Once you are at that setting,press the down arrow( y ) one time on select button to set this option.You will see Wash -o-Rinse -D. Spin sequence light up with a red light. Normal Cycle: This is used for soiled permanent press, silks, woollens, nylon, cotton clothes and acrylic fabrics. With normal wash speed, the agitator moves faster. This cycle is approximately 87 to 93 minutes. Note: The soak time will be approximately 25 minutes in this cycle. If you do not want to select the "soak" option in order to wash lightly soiled items faster when using this cycle,select "Process Mode" by pressing left arrow (.4 ) on select button. Once you are at that setting, press the down arrow( it ) one time on select button to set this option. You will see Wash-0..Rinse Spin sequence light up with a red light. 10