Haier HWM5TL User Manual - Page 15
Wash/rinse
View all Haier HWM5TL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
U English Selecting Wash/Rinse Temperature: When you turn the power "ON", the initial temperature is set at "Cold/Cold" position. You will see the red light lit up at this position. For your convenience, there are three temperature options you can select From based on the fabric type: Hot/Cold, Warm/Cold and Cold/Cold. If you want to select your desired option at this time, follow the procedure below. 1. Keep pressing the left arrow (-4 ) on the select button until the red light of the "Temp Select" button is lit up. 2. Once you are at this setting, use the down arrow ( y ) to select the proper temperature option for your clothes. Always refer to the label on the garment for the proper temperature that is recommended by garment manufacturers. See the reference chart below to select the proper temperature for the fabrics. WASH/RINSE Cold/Cold TYPES OF FABRICS Non-colour Fabrics, lingerie with light or normal soiled clothes & special care fabrics Warm/Cold Delicate & coloured Fabrics Hot/Cold Sturdy whites & coloured Fabrics such as work & play clothes, soiled fabrics Start/Pause Button: After selecting your options and closing the washer door properly, you need to press the "Start/Pause" button to start the washer. • If you want to pause during the cycle, simply press "Start/Pause" button. This will stop the activity during the cycle until you press this button again to resume the cycle. 13 Delay Start Button: This convenient option lets you delay the start of the wash cycle between 2 to 24 hours. • Press right arrow (.-) on select button to go to "Delay Start." TIME REP/AWING I:I I:l TYNER ON 4 Z:b On* VW • To choose the number of hours you want to delay the wash, press down arrow ( y ) on the select button. • During this cycle if you want to cancel, you must turn the power off and reselect the option. End of Cycle Signal: The machine will beep at the end of the cycle, indicating that the washing is complete and washer will turn off automatically. Closing the Top Lid: As a safety device, you must always have the top lid closed during the wash process. If you open the top lid while the wash cycle is on, you will observe the following. • The machine will beep. • The filling and the draining of the water will stop. • The tub will not spin while the lid is open. • If the unit is in the wash mode it will stop. Simply close the top lid to resume the cycle again. 14