Hamilton Beach 64695N Use And Care - Page 5
Using Your Mixer
UPC - 040094646951
View all Hamilton Beach 64695N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
840107200 ENv02.qxd 11/25/02 10:46 AM Page 5 Optional Features (Available on selected models) Mixing Shield 1. To attach: Place small tabs on the mixing shield into grooves on side of mixer. Push the shield back onto the mixer. The mixing shield will snap into place in the groove around the mixer. 2. Now insert the beaters or other attachments and use the mixer as you normally would. 3. To remove: Turn mixer off and unplug. Eject beaters or other attachments. 4. Grasp mixing shield in one hand, while holding mixer in other hand. Pull shield straight out, then up, to remove. Power Boost Press and hold down the button for additional power Power at any speed. Burst NOTE: Never use Power Burst for more than two minutes at a time or motor may overheat. Bowl Rest™ This feature can be used on most large mixing bowls. Use the Bowl Rest while adding ingredients or checking a recipe. To use, TURN MIXER OFF, then set the mixer on the edge of the bowl. CAUTION: • Never use Bowl Rest when mixer is on. • Do not use Bowl Rest on small (11⁄2 quart) mixing bowls or plastic mixing bowls. 5. Wash mixing shield in hot, soapy water. Rinse and dry. Mixer Lockdown Button Use this feature to lock the mixer in the "down" position when using on the stand. Shift and Stir™ Bowl Lever Use the lever to move the turntable. This allows you to position the beaters near the edge of the bowl or in the center. Using Your Mixer 1. Always make sure mixer is unplugged and speed control is set on OFF. Insert beaters. Use as hand mixer or assemble on stand. 2. Plug mixer into electrical outlet. 3. Move the speed control to desired speed, starting at 1 and increasing to a higher speed as necessary. 4. If using as a stand mixer do not leave mixer unattended. Always monitor the progress of the mixing. 5