Harman Kardon AVR 325 Owners Manual - Page 6
These LEDS will - dolby digital receiver
View all Harman Kardon AVR 325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FRONT-PANEL CONTROLS press this button to select Dolby modes, and then press the Surround Mode Selector 8 to choose from the various mode options. 8 Surround Mode Selector: Press this button to select from among the available surround mode options for the major mode group selected. The specific modes will vary based on the number of speakers available, the major mode group and whether the input source is digital or analog. For example, press the Surround Mode Group Selector 7 to select a major mode grouping such as Dolby or Logic 7, and then press this button to see the specific mode choices that are available. For more information on mode selection, see page 26. 9 Tuning Selector: Press the left side of the button to tune lower-frequency stations and the right side of the button to tune higher-frequency stations. When a station with a strong signal is reached, the TUNED Indicator I will be lit in the Main Information Display ˜. ) ‹ Button: When making system configuration changes using the front-panel controls, press this button to scroll left through the available choices for the option being adjusted. ! Tuner Band Selector: Pressing this button will automatically switch the AVR 325 to the Tuner mode. Pressing it again will switch between the AM and FM frequency bands. (See page 30 for more information on the tuner.) @ Set Button: When making system configuration changes using the front-panel controls, press this button to enter a setting into the unit's memory. # › Button: When making system configuration changes using the front-panel controls, press this button to scroll right through the available choices for the option being adjusted. $ Preset Station Selector: Press this button to scroll up or down through the list of stations that have been entered into the preset memory. (See pages 30 and 31 for more information on tuner programming.) % Input Source Selector: Press this button to change the input by scrolling up or down through the list of input sources. ^ Tuner Mode Selector: Press this button to select Auto or Manual tuning. When the button is pressed so that the AUTO Indicator J lights, the tuner will search for the next station with an acceptable signal when the Tuning Selector 9ué is pressed. When the button is pressed so that the AUTO Indicator J is not lit, each press of the Tuning Selector 9ué will increase the frequency. (See page 30 for more information on using the tuner.) This button may also be used to switch between Stereo and Mono modes for FM radio reception. When weak reception is encountered, press the button until the Stereo Indicator H goes out to switch to Mono reception. Press and hold again to switch back to Stereo mode. (See page 30 for more information on using the tuner.) & Optical 3 Digital Input: Connect the optical digital output of an audio or video product to this jack. * Coaxial 3 Digital Input: Connect the coaxial digital input of a digital audio product such as a portable audio player or video game to this jack. ( Video 4 Video Input Jacks: These jacks may be used to connect the video play/out jacks of a video game or portable video product such as a camcorder, video game or digital still camera to your system. Ó Video 4 Audio Input Jacks: These audio/video jacks may be used for connection to the audio play/out jacks of a video game or portable audio/video product such as a camcorder or portable audio player. Ô Bass Control: Use this control to boost or reduce the low-frequency output of the left/right front channels by as much as ±10dB. Set this control as you find suitable to adjust to your specific taste or room acoustics. Balance Control: Use this control to change the relative volume for the front left/right channels. NOTE: When multichannel surround modes are in use, this control should be at the midpoint, or "12 o'clock," position for proper operation. Ò Treble Control: Use this control to boost or reduce the high-frequency output of the left/right front channels by as much as ±10dB. Set this control as you find suitable to adjust to your specific taste or room acoustics. Ú Channel Adjust Selector: Press the button to begin the process of adjusting the channel level outputs using the source currently playing through your AVR. For complete information on adjusting the channel output level, see page 31. Û Delay Adjust Selector: Press this button to begin the process of adjusting the delay settings for Dolby surround modes. See page 23 for more information on delay adjustments. Ù Digital Input Selector: Press this button to begin the process of selecting a digital source for use with the currently selected input. Once the button has been pressed, use the ‹ or › Buttons )# to choose the desired input and then press the Set Button @ to enter the setting into the unit's memory. See page 27 for more information on digital audio. ı Volume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the AVR 325 is muted, adjusting volume control will automatically release the unit from the silenced condition. ˆ Input Indicators: A green LED will light to the left of the input that is currently the input source for the AVR 325. ˜ Main Information Display: This display delivers messages and status indications to help you operate the receiver. (See page 7 for a complete explanation of the Information Display.) ¯ Remote Sensor Window: The sensor behind this window receives infrared signals from the remote control. Aim the remote at this area and do not block or cover it unless an external remote sensor is installed. ˘ Surround Mode Indicators: These LEDS will light to show the surround mode and digital bitstream in use. Note that depending on the specific combination of input sources and surround mode selected, more than one indicator may light. (See page 28 for more information.) 6 FRONT-PANEL CONTROLS