Harman Kardon AVR 325 Owners Manual - Page 7
Front-panel Information Display - audio video receiver
View all Harman Kardon AVR 325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
LK FRONT-PANEL INFORMATION DISPLAY JI H G F E AB CD A Upper Display Line B Lower Display Line C OSD Indicator D Multiroom Indicator E Speaker/Channel Input Indicators F PRESET Indicator G MEMORY Indicator H STEREO Indicator I TUNED Indicator J AUTO Indicator K 192kHz Indicator L 96kHz Indicator A Upper Display Line: Depending on the unit's status, a variety of messages will appear here. In normal operation, the current audio and video input source information will appear on this line. B Lower Display Line: Depending on the unit's status, a variety of messages will appear here. In normal operation, the current surround mode name will appear on this line. C OSD Indicator: When the OSD system is in use, this indicator lights to remind you that the other indicators in this display do not function when the OnScreen Display is being used. D Multiroom Indicator: This indicator lights when the multiroom system is active. It will remain lit when the multiroom system is in use even though the main room system is in the Standby mode and all other indicators are dark. (See page 34 for more information on the Multiroom system.) E Speaker/Channel Input Indicators: These indicators are multipurpose, indicating either the speaker type selected for each channel or the incoming data-signal configuration. The left, center, right, right surround and left surround speaker indicators are composed of three boxes, while the subwoofer is a single box. The center box lights when a "Small" speaker is selected, and the two outer boxes light when "Large" speakers are selected. When none of the boxes are lit for the center, surround or subwoofer channels, no speaker has been selected for one of those positions. (See page 21 for more informa- tion on speaker setup.) The letters inside each of the center boxes display the active input channels. For standard analog inputs, only the L and R will light, indicating a stereo input. When a digital source is playing, the indicators will light to display the channels being received at the digital input. When the letters flash, the digital input has been interrupted. (See page 29 for more information on the channel indicators.) F PRESET Indicator: This indicator lights when the tuner is in use to show that the present number for the current station being listened to appears in the Upper Display Line. (See page 30 for more information on tuner presets.) G MEMORY Indicator: This indicator flashes when entering presets and other information into the tuner's memory. H STEREO Indicator: This indicator lights when an FM station is being tuned in stereo. I TUNED Indicator: This indicator lights when a station is being received with sufficient signal strength to provide acceptable listening quality. J AUTO Indicator: This indicator lights when the tuner's Auto mode is in use. K 192kHz Indicator: This indicator lights when the input source has a 192kHz bit rate. L 96kHz Indicator: This indicator lights when the input source has a 96kHz bit rate. FRONT-PANEL INFORMATION DISPLAY 7