Harman Kardon AVR20 Owners Manual - Page 10
Video/audio, Output, Jacks, Input, Video, Monitor, Remote, Control, Multi, Front, Center, Speaker,
View all Harman Kardon AVR20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
13 VIDEO/AUDIO OUTPUT (REC) JACKS OF VCR1 Connect these jacks to the corresponding INPUT jacks of a VCR. VIDEO OUTPUT jack: Connect this jack to the VIDEO INPUT jack of the VCR. VIDEO REC jack: Connect these jacks to the AUDIO INPUT jacks of the VCR. 14 VIDEO/AUDIO INPUT (PLAY) JACKS OF VCR 2 Connect these jacks to the corresponding OUTPUT jacks of your VCR or VDP. 15 VIDEO MONITOR JACK Connect this jack to the VIDEO INPUT jack of a TV/MONITOR. 16 REMOTE CONTROL OUT JACK Connect this jack to the "REMOTE IN" jack on a Harman Kardon component. Use one of the accessory mini-plug cables You can control many other Harman Kardon components in your system using the AVR20 remote commander. 17 MULTI-ROOM REMOTE IN JACK Connect a Harman Kardon HE 1000 remote I.R. sensor to this jack. You can operate the unit by remote commander through the adaptor. It is convenient when the unit is located in a separate room. (See page 10) 18 FRONT, CENTER, REAR PRE OUT AND MAIN IN JACKS FRONT PRE OUT When a separate power amplifier is used to drive the front speakers, connect the power amplifier input to these jacks. FRONT MAIN IN When a separate pre-amplifier is connected and this unit is used as a power amplifier, connect the pre-amplifier output to these jacks. NOTE: When you do not use the PRE OUT and MAIN IN separately, always connect the PRE OUT and MAIN IN jacks with a jumper plug. CENTER PRE OUT When a separate power amplifier is used to drive the center speaker, connect the power amplifier input to these jacks. REAR PRE OUT When a separate power amplifier is used to drive the rear speaker, connect the power amplifier input to these jacks. 19 1/2 SPEAKER TERMINALS Connect the main left (L) and right (R) speakers to the corresponding A and B speaker terminals. Make sure that the positive (+) and negative (-) terminals on the speaker are connected to the corresponding terminals on the receiver. 20 CENTER/REAR SPEAKER TERMINALS Connect center and rear speakers to the corresponding terminals. When you connect the rear speakers, connect both L and R speakers. 21 AC INPUT CORD Plug this cord in AC outlet on a wall. 22 AC SWITCHED OUTLET These outlets provides AC power. The AC power is switched by the power button. Use these outlets for a CD player and a cassette deck. 23 AC UNSWITCHED OUTLET This outlet provides AC power. The AC power is not switched by the power button. Use this outlet for a turntable. NOTE: Do not plug irons or toasters or other products with high power consumption into these outlets. 9