Harman Kardon AVR20 Owners Manual - Page 17
AVR2O, System, Remote, Control
View all Harman Kardon AVR20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
AVR2O System Remote Control 1. INFRARED TRANSMITTER WINDOW The infrared beam is emitted forward from this window when you press any button on the commander. For the remote controls to function properly, always face this window toward the remote sensor window on the receiver and do not obstruct this window with any material. 2. POWER BUTTON Press this button to turn the power on and off. - Automatic power on: When you press the input function buttons (CD, TUNER, TAPE 1, TAPE 2, TV/AUX, VCR 1, VCR 2, PHONO) in STANDBY mode, the power is automatically turned on and the function is selected. 3. TUNING UP/DOWN Press these buttons to tune the receiver up or down. 4. PRESET SCAN BUTTON Button for scanning preset station frequencies (see page 15). 5. NUMERIC BUTTONS These buttons can be used for preset tuning in TUNER mode, or selection of the track number in CD mode. - Preset tuning: Press the TUNER button to change the input function of the receiver to TUNER and then select one of 30 preset locations. - Selection of CD track number: Press the CD button to change the input function of the receiver to CD and press the desired track number (1, 2, ... 98, 99), then the CD player starts to play. 6. CD FUNCTION BUTTONS For a CD PLAYER: DISC (DISC SELECTOR, this is available for the Harman Kardon FL8400 CD changer), (play), (pause), (stop), (backward search), (forward search), (backward skip), (forward skip), A-B and INTRO buttons are available. - When selecting a disc, press the DISC button and the desired disc number (1-5) in the NUMERIC buttons within 2 seconds. A-B button is used to repeat a specific passage. 7. CASSETTE DECK FUNCTION BUTTONS-For a cassette deck: (pause/record), (stop), (reverse play), (forward play), (rewind), (fast forward) buttons are available. 8. DELAY TIME BUTTON This button operates only in Dolby Pro Logic and HALL mode. In these modes, the output signal from the surround speakers is delayed slightly from that of the front speakers. Select appropriate delay time to achieve the best surround sound effect. For Dolby-Surround sound, we recommend a 20ms delay. The time is changed as below, when the button is pressed in succession. DOLBY PRO LOGIC MODE 15 ms -› 20 ms 25 ms ----> 30 ms HALL MODE r 05 ms ->10 ms -*15 ms ->20 ms -4 25 ms -> 30 ms i 9. INPUT FUNCTION SELECTOR Press the button to select the desired input function. The available buttons are CD, TUNER, TAPE 1, TAPE 2, TV/AUX, VCR 1, VCR 2, and PHONO. 10. CENTER LEVEL UP/DOWN BUTTONS Use these buttons to adjust the sound level of the center speaker to that of the front speakers. These buttons work only in Dolby Pro Logic and Dolby 3 Stereo mode. These buttons do not work in PHANTOM mode. 11. CENTER MODE BUTTON Selects the center mode (see page 14). 12. TEST TONE BUTTON Generates test sounds in all channels (Left, Center, Right and Surround) in succession. 13. REAR LEVEL UP/DOWN BUTTONS These buttons operate only in Dolby Pro Logic and HALL mode. Use these buttons to adjust the sound level of the surround speakers. Set the MASTER VOLUME control at the desired level and press the up or down button until you get the optimum surround effect at your listening position. 14. MASTER VOLUME BUTTONS Adjust the overall (front, center, and rear) volume level. 15. DISPLAY BUTTON Press once and the display dims, press again and it turns off. Press a third time and it goes on. 16. SLEEP BUTTON Sets the receiver to automatically turn off after 10, 20, 30, 60, or 90 minutes. Each time the button is pressed, the setting is advanced as below. ro.10min -0-20min -0-30min -o-60min -.90min-p-OFF The display will dim when the sleep function has been set 16