HealthRider H 300 Treadmill English Manual - Page 9

Screws 2 into the Right Grip Plate and the Console

Get HealthRider H 300 Treadmill PDF manuals and user guides View all HealthRider H 300 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

7. Press the Upright Wire (42) into the slot in the underside 7 of the Console Base (47) in the indicated area. Cover the Upright Wire with the Right Grip Plate (36). Be careful not to pinch the Upright Wire. Tighten three 3/4" Screws (2) into the Right Grip Plate and the Console Base. 47 Slot 42 36 2 8. Attach the Storage Latch (29) and the Latch Spacer (44) 8 to the left Upright (69) with two 3/4" Screws (2) as shown. Do not overtighten the Screws. 69 29 44 2 9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see page 24). To protect the floor or carpet, place a mat under the treadmill. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
9
9.
Make sure that all parts are properly tightened before you use the treadmill.
Note: Extra hardware may
be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt
(see page 24). To protect the floor or carpet, place a mat under the treadmill.
8.
Attach the Storage Latch (29) and the Latch Spacer (44)
to the left Upright (69) with two 3/4” Screws (2) as shown.
Do not overtighten the Screws.
2
69
29
44
42
36
47
7.
Press the Upright Wire (42) into the slot in the underside
of the Console Base (47) in the indicated area. Cover the
Upright Wire with the Right Grip Plate (36).
Be careful
not to pinch the Upright Wire.
Tighten three 3/4”
Screws (2) into the Right Grip Plate and the Console
Base.
2
Slot
7
8