HealthRider H400 Treadmill English Manual - Page 6

Assembly

Get HealthRider H400 Treadmill PDF manuals and user guides View all HealthRider H400 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

(69)-2 ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high1-"pTeerkfoSrmcraenwce lubricant. During shipping, lubricant may be transferred to the top of the walking rew (123)-2 belt or the shipping(4c7a)r-to8n. This is a normal condition and does not affect1tr"eSaidlvmerillSpcerrefworm(9a2n)-c2e. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. 1 1/2" Screw Assembly requires the included hex keys and your own phillips screwdriver ters , and adjustable spanner . ,wire cut- For help identifying assembly hardware, see the drawings below. Note: If a part is not found in the part bags, check to see if the part has been preattached. 5/16" x 1" Bolt (113)-4 1/4" x 1" Bolt (88)-8 3/4" Screw (33)-5 1" Tek Screw (123)-4 1/2" Screw (52)-1 5/16" x 3 1/2" Bolt (121)-2 1/4" Star Washer (87)-8 5/16" Washer (130)-2 1. With the help of a second person, carefully raise the Uprights (96) to the position as shown. 1 Insert one of the Extension Legs (86) into the treadmill as shown. Make sure that the Extension Leg is turned so the Base Pad (125) is underneath it. If necessary, tip the Uprights (96) forward as you insert the Extension Leg. Insert the other Extension Leg (not shown) in the same way. 96 86 125 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
ASSEMBLY
Assembly requires two persons.
Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking
belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys
and your own phillips screwdriver
,wire cut-
ters
, and adjustable spanner
.
For help identifying assembly hardware, see the drawings below.
Note: If a part is not found in the part bags,
check to see if the part has been preattached.
1/4” x 1” Bolt
(88)–8
5/16” x 1” Bolt
(113)–4
1/2” Screw (52)–1
3/4” Screw (33)–5
1/4” Star Washer
(87)–8
1” Tek Screw
(123)–4
5/16” x 3 1/2” Bolt (121)–2
5/16” Washer (130)–2
6
1.
With the help of a second person, carefully raise the
Uprights (96) to the position as shown.
Insert one of the Extension Legs (86) into the treadmill as
shown. Make sure that the Extension Leg is turned so
the Base Pad (125) is underneath it. If necessary, tip the
Uprights (96) forward as you insert the Extension Leg.
Insert the other Extension Leg (not shown) in the same
way.
1
96
86
125