HP 1606 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 169
spanning-tree autoedge
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
DRAFT: BROCADE CONFIDENTIAL spanning-tree autoedge 9 spanning-tree autoedge Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Enables automatic edge detection. spanning-tree autoedge no spanning-tree autoedge none Auto detection is not enabled. Interface configuration mode Use this command to automatically identify the edge port. The port can become an edge port if no Bridge Protocol Data Unit (BPDU) is received. To enable automatic edge detection: switch(conf-if-te-0/1)#spanning-tree autoedge protocol spanning-tree Converged Enhanced Ethernet Command Reference 151 53-1001762-01
Converged Enhanced Ethernet Command Reference
151
53-1001762-01
spanning-tree autoedge
9
DRAFT: BROCADE CONFIDENTIAL
spanning-tree autoedge
Enables automatic edge detection.
Synopsis
spanning-tree autoedge
no spanning-tree autoedge
Operands
none
Defaults
Auto detection is not enabled.
Command
Modes
Interface configuration mode
Description
Use this command to automatically identify the edge port.
Usage
Guidelines
The port can become an edge port if no Bridge Protocol Data Unit (BPDU) is received.
Examples
To enable automatic edge detection:
switch(conf-if-te-0/1)#
spanning-tree autoedge
See Also
protocol spanning-tree