HP 1606 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 214
qos cos-traffic-class
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
12 qos cos-traffic-class DRAFT: BROCADE CONFIDENTIAL qos cos-traffic-class Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Applies a CoS-to-Traffic Class QoS map on an interface. qos cos-traffic-class name no qos cos-traffic-class name Specifies the name of a previously created CoS-to-Traffic Class QoS map. Only one CoS-to-Traffic Class QoS map can exist at a time. An existing CoS-to-Traffic Class QoS map must be removed before a new one can be applied. There is no explicit CoS-to-Traffic Class QoS map applied; the implicit behavior is to match the IEEE 802.1Q recommendations for systems supporting eight Traffic Classes. Interface configuration mode Use this command to apply a CoS-to-Traffic Class QoS map to an interface. Use the no qos cos-traffic-class command to remove the CoS-to-Traffic Class mapping. This command is not available when the interface is in the CEE Provisioning mode. To apply a CoS-to-Traffic Class QoS map to an interface: switch(conf-if-te-0/1)#qos cos-traffic-class test qos map cos-traffic-class, qos trust, qos cos-mutation, show qos maps 196 Converged Enhanced Ethernet Command Reference 53-1001762-01