HP 1606 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 229

DRAFT: BROCADE CONFIDENTIAL show qos maps 12 show qos maps Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Displays information on the defined QoS maps. show qos maps [{cos-mutation [name] | cos-traffic-class [name]} ] cos-mutation name Specifies to report on only the named CoS-to-CoS mutation QoS map. cos-traffic-class name Specifies to report on only the named CoS-to-Traffic Class QoS maps. The default behavior without any specified operands is to report on all defined QoS maps. EXEC mode Use this command to display information on the QoS defined maps. For each QoS map, the configuration state is displayed with a list of all interfaces bound to the QoS map. There are no usage guidelines for this command. To display information on the defined QoS maps: switch#show qos maps CoS-to-CoS Mutation map 'test' In-CoS: 0 1 2 3 4 5 6 7 Out-CoS: 0 1 2 3 5 4 6 7 Enabled on the following interfaces: Te 0/5 CoS-to-Traffic Class map 'test' Out-CoS: 0 1 2 3 4 5 6 7 TrafficClass: 0 1 2 3 5 4 6 7 Enabled on the following interfaces: Te 0/5 qos maps, show qos interface Converged Enhanced Ethernet Command Reference 211 53-1001762-01