HP 1606 Fabric OS FCIP Administrators Guide v6.4.0 (53-1001766-01, November 20 - Page 46
Configuration steps, Tunnel options
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2 Configuration steps TABLE 4 Tunnel options Option Argument Compression -c 0|1|2|3 FCIP fast write -f 0|1 OSTP -t 0|1 Display remote FC WWN -n Enable IPSec -i IKE V2 authentication Key for IPSec FICON extension and emulation options -K -F Disruptive Description Enables compression on an FCIP tunnel. Compression is set by the portCfg fciptunnel create or modify command, and applies to traffic over all circuits in the tunnel. Compression cannot be set or modified by the portCfg fcipcircuit create or modify command. A value of 1 enables hardware compression. A value of 0 disables compression. A value of 2 enables a combination of hardware and software compression that provides more compression that hardware compression alone. This option supports up to 8 Gbps of FC traffic. A value of 3 enables a software only compression option that provides a more aggressive algorithm. This option supports up to 2.5 Gbps of FC traffic. Enables or disables FCIP fast write. A value of 1 enables FCIP fast write. A value of 0 disables FCIP fast write. FCIP fast write is initially disabled, and must be enabled to take effect. Enables or disables tape OSTP. A value of 1 enables OSTP. A value of 0 disables OSTP. OSTP is initially disabled. Both FCIP fast write and OSTP must be enabled if you want to implement OSTP, as described in "Open Systems Tape Pipelining" on page 23. Causes the remote-side FC entity WWN to display in the portshow output for the VE_port. Enables a pre-defined IPsec policy on this FCIP tunnel. Refer to"IPSec implementation over FCIP tunnels" on page 20 for information about IPSec policies. The pre-shared key used during IKE authentication. These options are described in the Fabric OS FICON Administrator's Guide. 32 Fabric OS FCIP Administrator's Guide 53-1001766-01