HP 1606 Fabric OS FCIP Administrators Guide v6.4.0 (53-1001766-01, November 20 - Page 66
Options for enhancing tape I/O performance, FCIP Fastwrite and OSTP
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3 Options for enhancing tape I/O performance Options for enhancing tape I/O performance There are two options available for enhancing open systems SCSI tape write I/O performance: • FCIP Fastwrite and Open Systems Tape Pipelining (OSTP) • FC Fastwrite FCIP Fastwrite and OSTP are implemented together. FC Fastwrite is an FC-FC routing alternative that disables the local Ethernet ports (ge0 and ge1), making it impossible to configure FCIP Fastwrite and OSTP and FC Fastwrite on the same 7500 or FC4-18i blade. Refer to Appendix A, "Fibre Channel Fast Write (FCFW)" for information about FC Fastwrite. FC Fastwrite flows may be routed to another 7500 or FC4-18i blade on the FC network. This 7500 or FC4-18i blade may have active FCIP tunnels over an IP network. FC Fastwrite flows may be passed through the FCIP tunnel, but only if the FCIP Fastwrite option is disabled on the tunnel. FCIP Fastwrite and OSTP When the FCIP link is the slowest part of the network, consider using FCIP Fastwrite and OSTP. FCIP Fastwrite and OSTP are two features that provide accelerated speeds for read and write I/O over FCIP tunnels in some configurations: OSTP accelerates SCSI read and write I/Os to sequential devices (such as tape drives) over FCIP, which reduces the number of round-trip times needed to complete the I/O over the IP network and speeds up the process. To use OSTP, you must also enable FCIP Fastwrite. Both sides of an FCIP tunnel must have matching configurations for these features to work. FCIP Fastwrite and OSTP are enabled by turning them on during the tunnel configuration process. They are enabled on a per-FCIP tunnel basis. See "Creating an FCIP tunnel" on page 61 for details. Consider the constraints described in Table 12 when configuring tunnels to use either of these features. TABLE 12 Using FCIP Fastwrite and OSTP FCIP Fastwrite OSTP Each GbE port supports up to 2048 simultaneous accelerated exchanges, which means a total of 2048 simultaneous exchanges combined for Fastwrite and OSTP. Each GbE port supports up to 2048 simultaneous accelerated exchanges, which means a total of 2048 simultaneous exchanges combined for Fastwrite and OSTP. Does not affect FICON traffic Does not affect FICON traffic FCIP Fastwrite and FC Fastwrite are mutually exclusive. OSTP uses FCIP Fastwrite, not FC Fastwrite. Does not support multiple equal-cost path configurations (see "FCIP Fastwrite and OSTP configurations"). Does not support multiple equal-cost path configurations or multiple non-equal-cost path configurations (see "FCIP Fastwrite and OSTP configurations"). 52 Fabric OS FCIP Administrator's Guide 53-1001766-01