HP 200 HP StorageWorks 200 Storage Virtualization System owner's guide (AE071- - Page 25
Label, Indicator, Description
View all HP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Item Label 1 READY 2 ALARM 3 MESSAGE Indicator LED (Green) LED (Red) LED (Amber) Description During normal operation, this LED should be on. ON: Input/output on the channel interface is enabled. OFF: The system is not accepting data. During normal operation, this LED should be off. ON: One or more of the following: The DC is under voltage. The DC is over current. The temperature is abnormally high. An unrecoverable failure has occurred.If the system is set up to "phone home" to STC; your HP support representative is notified automatically. If the system is not set up to "phone home," place a service call to HP to have the message evaluated to determine if any action is required. BLINKING: The DC is under voltage. During normal operation, this LED should be off. ON: A service information message (SIM) has been issued. If the system is set up to "phone home" to STC, your HP support representative is notified automatically. If the system is not set up to phone home, place a service call to HP to have the message evaluated to determine if any action is required. BLINKING: An SVP failure has occurred. The system will continue to operate normally. Place a service call to HP to ensure notification. SVP failures might not be reported automatically to STC. HP StorageWorks 200 Storage Virtualization System owner's guide 25