HP 200 HP StorageWorks 200 Storage Virtualization System owner's guide (AE071- - Page 56
Laser safety, regulation 21 CFR, Sub J. The certi
View all HP 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Laser safety When equipped with native Fibre Channel adapters, this product contains a laser internal to the Optical Link Module (OLM) contained on the 8-port Fibre Channel Adapter board and 8-port FICON board, and on the 16-port Fibre Channel Adapter board and 16-port FICON board for connection to a fibre communications network. In the USA, the OLM is certified as a Class 1 laser product conforming to the PRT requirements contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is indicated by a label on the plastic OLM housing. Outside the USA, the OLM is certified as a Class 1 laser product conforming to the requirements contained in IEC 825-1:1993 and EN 60825-1:1994, including Amendment 11:1996. The following figure shows the Class 1 information label that appears on the plastic housing of the OLM. CLASS 1 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 Each communications port consists of a transmitter and receiver optical subassembly. The transmitter subassembly contains an internal semiconductor laser diode in the wavelength range of 770 to 850 nanometers. In the event of a break anywhere in the fibre path, the OLM control system prevents laser emissions from exceeding Class 1 levels. Class 1 laser products are not considered hazardous. WARNING! There are no user maintenance operations, service operations, or adjustments to be performed on the Optical Link Module. 56 Regulatory statements