HP 3PAR StoreServ 7200 2-node HP 3PAR StoreServ 7000 Storage Service Guide (QR - Page 16
Verifying Disk Drives, Systems, Physical, Disks, State
View all HP 3PAR StoreServ 7200 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Figure 14 Installing a 3.5 inch disk drive Verifying Disk Drives 1. Verify the disk drive has been successfully replaced. 2. Display the physical disks to monitor. Open the system in the Systems tab and select Physical Disks. NOTE: Users can select the column header State to resort. NOTE: Until data has been restored, the original disk drive will display as Failed and the replacement disk drive will display as Degraded. 16 Servicing the Storage System
Figure 14 Installing a 3.5 inch disk drive
Verifying Disk Drives
1.
Verify the disk drive has been successfully replaced.
2.
Display the physical disks to monitor. Open the system in the
Systems
tab and select
Physical
Disks
.
NOTE:
Users can select the column header
State
to resort.
NOTE:
Until data has been restored, the original disk drive will display as
Failed
and the
replacement disk drive will display as
Degraded
.
16
Servicing the Storage System