HP 3PAR StoreServ 7400 2-node HP 3PAR SmartStart 1.1 User's Guide (QL - Page 19
Con the Fibre Channel Host, Introduction to Configuring the Fibre Channel Host
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Configure the Fibre Channel Host Introduction to Configuring the Fibre Channel Host To set up Fibre Channel connections, ensure that the host system and HP 3PAR StoreServ 7000 Storage system have two Fibre Channel connections. You can configure the Fibre Channel host if you have only one connection, but if that connection stops functioning, the host will not be able to access (read from or write data to) the HP 3PAR StoreServ Storage system. For more information about setting up Fibre Channel connections, see the HP 3PAR Windows Implementation Guide. To access this document, go to the HP 3PAR Documentation site: http://www.hp.com/3par/support_manuals CAUTION: The Fibre Channel Host Configuration wizard might require a reboot of the host system. If the host system cannot be rebooted at this time, use the Fibre Channel Host Configuration wizard to configure your Fibre Channel connections when a possible reboot is more convenient. Configuring Local and Remote Connections You can use SmartStart to: • Connect the local host (the Windows 2008 R2 server into which you inserted the SmartStart media) to the HP 3PAR StoreServ Storage system • Connect a remote host (any Windows 2008 R2 server other than the Windows 2008 R2 server into which you inserted the SmartStart media) to the HP 3PAR storage system To connect to and configure a remote host system: ◦ You must be able to use the same ID and password to gain administrator access to both the local host and the remote host. If you cannot use the same login, you must insert the SmartStart media into the remote host and configure the machine as a local host. ◦ If you have set up domains on your local host system and plan to configure a remote host system, that remote host must be in the same domain as the local host. Connect to the Fibre Channel Host System 1. In the Host address text box: • If you are configuring the machine into which you inserted the SmartStart media, enter: localhost • If you are configuring any host other than the machine running SmartStart, enter that host IP address or DNS hostname 2. Click Connect. 3. Click Next. Validate the Fibre Channel HBA Setup on the Host 1. Click Validate. SmartStart automatically detects and lists the HBAs installed on the host system. 2. Verify that at least two of the listed HBAs are supported by your HP 3PAR StoreServ Storage system. To verify your system's HBAs, go to the Single Point of Connectivity Knowledge for HP Storage Products (SPOCK) and navigate to the list of HBAs supported by your host system: http://www.hp.com/storage/spock Configure the Fibre Channel Host 19