HP 3PAR StoreServ 7400 2-node HP 3PAR SmartStart 1.1 User's Guide (QL - Page 26

Host Settings 1. In the General group box: a. System - Select the system to create the new host. b. Domain - Select the domain in which to create the new host. Select if not applicable. c. Name - Enter the host name. Names are case-sensitive. d. Set Name - Select the host set in which to create the new host. Select if not applicable. e. Host OS - Select the operating system running on the host. f. Persona - The host persona will be visible and disabled. When Host OS is selected, the corresponding persona will be selected for the user, and the Operating System descriptor field will be filled with the Host OS automatically. • 1 = Generic (Unit Attention Report LUNs, Enable SES device) • 2 = Generic-ALUA (Unit Attention Report LUNs, Report Target Port Groups, Enable SES device) • 6 = Generic-legacy • 7 = HPUX-legacy (Volume Set Addressing) • 8 = AIX-legacy (Normal Auto Contingent Allegiance) • 9 = Egenera (Soft Inquiry Data) • 10 = ONTAP-legacy (Soft Inquiry Data) • 11 = VMware (Enable Sub-LUN Addressing, Asymmetric Logical Unit Access) 2. (Optional) In the Descriptors group box, enter the description information as desired in the Location, IP Address, Operating System, Model, Contact, and Comments fields. 3. Click Next, or click Finish to close the wizard and create the host with the information entered. Fibre Channel 1. To assign available WWNs: a. Select one or more WWNs from the Available WWNs list. This list displays WWNs for all physically connected host paths not already assigned to hosts. b. Click the left arrow to add the selected WWN(s) to the Assigned WWNs list. 2. To assign new WWNs, enter the WWN(s) for the host in the New WWN text box and click Assign. 3. Click Next, or click Finish to close the wizard and create the host with the information entered. 26 Configure Storage