HP 3PAR StoreServ 7450 4-node HP 3PAR StoreServ 7450 Storage Troubleshooting G - Page 10
Power Distribution Units, Service Processor
View all HP 3PAR StoreServ 7450 4-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Figure 7 PCM numbering In the HP M6720 Drive Enclosure, the two PCMs are located diagonally from one another. The remaining PCM slots are filled with blank panels (see Figure 8 (page 10)). Figure 8 PCMs in a HP M6720 Drive Enclosure Power Distribution Units In each HP G3 rack, two PDUs are mounted horizontally at the bottom of the rack, numbered 0-1 from bottom to top. The default configuration for the HP Intelligent Series Racks is two PDUs mounted vertically at the bottom of the rack so to provide a front-mounting unit space. NOTE: Depending on configuration, PDUs can also be mounted vertically. Service Processor The HP 3PAR StoreServ 7450 Storage system can include an HP 3PAR Service Processor (SP) or a Virtual Service Processor (VSP). If your configuration includes an SP, it is located at the bottom of the rack under the enclosures and above the PDUs. 10 Identifying Storage System Components