HP 3PAR StoreServ 7450 4-node HP 3PAR StoreServ 7450 Storage Troubleshooting G - Page 56
Contacting HP Support about System Setup, Storage System Setup Wizard to work
View all HP 3PAR StoreServ 7450 4-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
The error can occur for one of the following reasons: ◦ Network connectivity is lost. ◦ The SP is no longer running. ◦ The SP is not plugged into the network. ◦ The SP IP address has been changed. • "Could not communicate with the storage system. Make sure it is running and connected to the network." This message can display if the HP 3PAR OS loses network connectivity, either by becoming unplugged or by going down for some other reason. This message displays either in a dialog box or inline. If the message displays in a dialog box, you can click Retry or Cancel in the wizard. If the message appears inline, you can only click Next in the wizard. • "Setup encountered an unknown error ({0}). Contact HP support for help." This message displays in a dialog box with Retry and Cancel buttons, where {0} is the error number. For information about contacting HP Support, see "Contacting HP Support about System Setup" (page 61). Errors that appear on the Enter System to Setup page • "Unable to execute the command. All required data was not sent to the SP server. Contact HP support for help." This message displays as an inline error on the bottom of the wizard page. For information about contacting HP Support, see "Contacting HP Support about System Setup" (page 61). • "No uninitialized storage system with the specified serial number could be found. Make sure the SP is on the same network as the specified storage system. " This message displays as an inline error on the bottom of the wizard page. In order for the Storage System Setup Wizard to work, the storage system must be on the same network as the SP, and you must type in the serial number of the storage system in order for the SP to find it. If either of these conditions is not met, this error message displays. Verify that the serial number you entered for the SP is correct, and then do one of the following: ◦ Move the SP or storage system so that they are on the same network. ◦ Use a different SP to set up the storage system. • "Unable to gather the storage system information. Make sure the specified storage system is running HP 3PAR OS 3.1.2 or later. For more help, contact HP support." This message displays as an inline error on the bottom of the wizard page. The error might be caused by a defect in the Storage System Setup Wizard code or by unexpected information being returned in the CLI. For information about contacting HP Support, see "Contacting HP Support about System Setup" (page 61). • "The SP encountered an unknown error while finding the specified storage system. Contact HP support for help." This message displays as an inline error on the bottom of the wizard page. 56 Troubleshooting