HP 410 HP Digital Copier printer 410 - (English) Reference Guide - Page 41
ink is drying, mechanism error, need print cartridge alignment, out of paper, paper is too narrow
UPC - 844844844303
View all HP 410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
ink is drying troubleshooting help cause solution Transparencies or Leave the media in the output tray until the message disappears. If other media require a necessary, carefully remove the printed media. Hold them from the longer than normal underside or the edges, and then place them on a flat surface to dry. drying time. mechanism error cause solution Protective tape is covering the print cartridge. Make sure you have removed all the tape over the nozzles. Reinsert the print cartridges and verify that they are fully inserted and locked in place. The unit has a paper For information on clearing a paper jam, see paper jams on page 31. jam. The print-carriage is blocked. • Make sure you have removed all packing materials. • Remove any objects that are blocking the print-carriage, and then turn the HP Digital Copier Printer off and on. need print cartridge alignment cause You installed new print cartridges. solution • You must align the print cartridges to ensure excellent print quality. After you insert a new print cartridge, press Enter on the front-panel. • If you see this message repeatedly, the print cartridge may be bad. out of paper cause solution The paper tray does not have enough paper. Make sure you have the paper tray loaded and on an even surface. The back door is off If you have removed the back door to clear a paper jam, replace it. the unit. paper is too narrow cause solution The paper you have loaded is not the correct size. When making a copy, you must have letter, A4, or legal-sized paper loaded. reference guide 37