HP 4300tn HP LaserJet 4200 and 4300 series printer - User Guide - Page 117
To remove an installed EIO, card or mass storage device optional hard disk
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Message CARTRIDGE FAILURE For help press alternates with RETURN FOR REPLACEMENT For help press CHECKING PRINTER CHOSEN PERSONALITY NOT AVAILABLE For help press alternates with To continue press CREATING CLEANING PAGE DETECTABLE SIZE IN TRAY [XX] For help press alternates with Recommend move switch to STANDARD DIFFERENT PAPER SIZES IN JOB DISK DEVICE FAILURE To enter menus press DISK FILE OPERATION FAILED To enter menus press DISK FILE SYSTEM IS FULL To enter menus press DISK IS WRITE PROTECTED To enter menus press DUPLEXER ERROR REMOVE DUPLEXER Install duplexer with power off EIO [X] disk initializing EIO DISK [X] NOT FUNCTIONAL For help press EIO [X] disk spinning up Explanation or recommended action The print cartridge still contains part of the sealing tape. 1. Try to remove the sealing tape. 2. If it cannot be removed, insert a new print cartridge and return the faulty print cartridge to receive a replacement. The printer is checking for possible jams or paper that was not cleared from the printer. The printer received a request for a personality that does not exist in the printer. The print job is canceled. To see a list of available personalities, print a configuration page. (See "To print a configuration page at the control panel" on page 84.) The printer is printing the cleaning page. Follow the instructions on the printed cleaning page to complete the cleaning. The printer detects that there is a standard size of paper loaded in the tray indicated. 1. If the paper is a standard size, move the knob to the Standard position. (See "Loading tray 2 or an optional 500-sheet tray" on page 43.) 2. If the paper is a custom size, make sure that the guides are positioned correctly in the tray. The stapler cannot align the paper for stapling if different paper sizes are in the job. Printing continues, but the job will not be stapled. If stapling is required, modify the job. The EIO disk had a critical failure and can no longer be used. Remove the EIO disk and replace it with a new one. (See "To remove an installed EIO card or mass storage device (optional hard disk)" on page 173.) The requested operation could not be performed. You might have attempted an illegal operation, such as trying to download a file to a non-existent folder. The EIO disk is full. Delete files from the EIO disk and then try again. Use the Device Storage Manager in HP Web Jetadmin to download or delete files and fonts. (See the HP Web Jetadmin software Help for more information.) The EIO disk is protected, and no new files can be written to it. Use the Device Storage Manager in HP Web Jetadmin to disable the write protection. The optional duplexer has an error. Turn off the printer power and reattach the optional duplexer. (Any print jobs at the printer might be lost.) The disk accessory in EIO slot [X] is initializing. The EIO disk is not working correctly. 1. Remove the EIO disk from the slot indicated by [X]. (See "To remove an installed EIO card or mass storage device (optional hard disk)" on page 173.) 2. Replace it with a new EIO disk. (See "To install EIO cards or mass storage devices" on page 173.) The disk accessory in EIO slot [X] is initializing. ENWW Understanding printer messages 115