HP 4300tn HP LaserJet 4200 and 4300 series printer - User Guide - Page 194
Card stock and heavy paper, Card stock construction, Card stock guidelines
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Note Card stock and heavy paper Many types of card stock can be printed from tray 1, including index cards and postcards. Some card stock performs better than others because its construction is better suited for feeding through a laser printer. For optimum printer performance, do not use paper heavier than 200 g/m2 (53 lb) in tray 1 or 120 g/m2 (32 lb) in other trays. Paper that is too heavy might cause misfeeds, stacking problems, jams, poor toner fusing, poor print quality, or excessive mechanical wear. Printing on heavier paper might be possible if the tray is not filled to capacity, and short-grain paper with a smoothness rating of 100 to 180 Sheffield is used. Card stock construction Smoothness: Card stock should have smoothness in the range of 100 to 180 Sheffield. Construction: Card stock should lie flat with less than 5 mm (0.2 inch) of curl. It should be short-grain paper to improve feeding and reduce wear on the printer. Condition: Make sure that card stock is not wrinkled, nicked, or otherwise damaged. Sizes: Use only card stock within the following size ranges: • minimum: 76 by 127 mm (3 by 5 inch) • maximum: 216 by 356 mm (8.5 by 14 inch) Before loading card stock in tray 1, make sure that it is regular in shape and not damaged. Also, make sure that the cards are not stuck together. Card stock guidelines If cards curl or jam, try printing from tray 1 and opening the rear output bin. Set margins at least 6 mm (0.24 inch) away from the edges of the paper. 192 Appendix D Specifications ENWW