HP 4300tn HP LaserJet 4200 and 4300 series printer - User Guide - Page 132
Scattered lines, Blurred print, TONER DENSITY, OPTIMIZE, LINE DETAIL=ON, HIGH TRANSFER=ON
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Scattered lines 1 Make sure that the type and quality of the paper you are using meet HP specifications. (See "Paper specifications" on page 182.) 2 Make sure that the environmental specifications for the printer are being met. (See "General specifications" on page 195.) 3 Turn over the stack of paper in the tray. Also, try rotating the paper 180 o. 4 Open the Configure Device menu at the printer control panel. Open the Print Quality submenu and change the TONER DENSITY setting. (See "TONER DENSITY" on page 161.) 5 Open the Configure Device menu at the printer control panel. On the Print Quality submenu, open OPTIMIZE and set LINE DETAIL=ON. Blurred print 1 Make sure that the type and quality of the paper you are using meet HP specifications. (See "Paper specifications" on page 182.) 2 Make sure that the environmental specifications for the printer are being met. (See "General specifications" on page 195.) 3 Turn over the stack of paper in the tray. Also, try rotating the paper 180 o. 4 Do not use paper that already has been run through the printer. 5 Decrease the toner density. See the description of "TONER DENSITY" on page 161. 6 Open the Configure Device menu at the printer control panel. On the Print Quality submenu, open OPTIMIZE and set HIGH TRANSFER=ON. (See "OPTIMIZE" on page 160.) 130 4 Problem solving ENWW