HP 4300tn HP LaserJet 4200 and 4300 series printer - User Guide - Page 164
System Setup submenu
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
System Setup submenu Items on this menu affect printer behavior. Configure the printer according to your printing needs. The section that follows lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk (*) next to it. Item JOB STORAGE LIMIT JOB HELD TIMEOUT TRAY BEHAVIOR USE REQUESTED TRAY MANUAL FEED PROMPT POWERSAVE TIME PERSONALITY Values Explanation 1 to 100 (*32) Specifies the number of quick copy jobs that can be stored on the printer. This item appears only if an optional hard disk accessory is installed. *OFF 1 HOUR 4 HOURS 1 DAY 1 WEEK Sets the amount of time that held jobs are kept before being automatically deleted from the queue. There is no value to select. Determines how the printer responds to jobs that request certain trays. Exclusively *First Determines whether the printer tries to pull paper from a different tray than the one you selected in the printer driver. EXCLUSIVELY: Sets the printer to pull paper only from the tray you selected and not pull from another tray, even if the tray you selected is empty. FIRST: Sets the printer to pull from the tray you selected first, but allows the printer to pull from another tray automatically if the tray you selected is empty. Always *Unless Loaded Determines when the printer shows a prompt regarding pulling from tray 1 if your print job does not match the type or size loaded in any other tray. ALWAYS: Select this option if you always want to be prompted before the printer pulls from tray 1. UNLESS LOADED: Prompts you only if tray 1 is empty. 15 MINUTES *30 MINUTES 60 MINUTES 90 MINUTES 2 HOURS 4 HOURS Sets how long the printer remains idle before it enters PowerSave mode. PowerSave mode does the following: minimizes the amount of power consumed by the printer when it is idle reduces wear on electronic components in the printer (turns off the display backlight, but the display is still readable) The printer automatically comes out of PowerSave mode when you send a print job, press a printer control panel button, open a tray, or open the top cover. To turn PowerSave mode on and off, see "POWERSAVE" on page 166.) *AUTO PS PCL Selects the default printer language (personality). Possible values are determined by which valid languages are installed in the printer. Normally, you should not change the printer language. If you change it to a specific printer language, the printer will not switch automatically from one language to another unless specific software commands are sent to the printer. 162 Appendix A Control panel menus ENWW