HP 4300tn HP LaserJet 4200 and 4300 series printer - User Guide - Page 51
Manually feeding paper from tray1, MANUAL FEED=ON
View all HP 4300tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Note Manually feeding paper from tray 1 The manual feed feature is another way of printing on special paper from tray 1. Setting MANUAL FEED to ON either in the printer driver or at the printer control panel stops the printer after each job is sent, allowing you time to load special paper or other print media in tray 1. (See "MANUAL FEED" on page 158.) Press PAUSE/RESUME to continue printing. If there is already paper in tray 1 when you send the print job, and the printer control panel has TRAY 1 TYPE=ANY and TRAY 1 SIZE=ANY as the default configuration for tray 1 operation, the printer will not stop and wait for paper to be loaded. To have the printer wait, set TRAY 1 TYPE and TRAY 1 SIZE to types other than ANY on the Paper Handling menu. If you have selected MANUAL FEED=ON at the printer control panel, this setting will override the printer driver, and all print jobs sent to the printer will request manually fed paper in tray 1 unless a specific tray has been selected in the printer driver. If this feature is to be used only occasionally, it is best to set MANUAL FEED=OFF at the printer control panel and to select the manual feed option in the printer driver on a job-by-job basis. If the SIZE and TYPE are set to ANY, and MANUAL FEED PROMPT is set to UNLESS LOADED, then the paper will be pulled from tray 1 without prompting. If MANUAL FEED PROMPT is set to ALWAYS, then the printer will prompt you to load paper, even if tray 1 is set to TYPE=ANY and SIZE=ANY. (See "MANUAL FEED PROMPT" on page 162.) ENWW Selecting which tray is used for printing 49