HP 48gII hp 48gII_user's manual_English_E_HDPMSG48E67_V2.pdf - Page 313

Function →DIAG Function →DIAG takes the main diagonal of a square matrix of dimensions n×n, and creates a vector of dimension n containing the elements of the main diagonal. For example, for the matrix remaining from the previous exercise, we can extract its main diagonal by using: In RPN mode, with the 3×3 matrix in the stack, we simply have to activate function DIAG to obtain the same result as above. Function DIAG→ Function DIAG→ takes a vector and a list of matrix dimensions {rows, columns}, and creates a diagonal matrix with the main diagonal replaced with the proper vector elements. For example, the command DIAG ([1,-1,2,3],{3,3}) produces a diagonal matrix with the first 3 elements of the vector argument: In RPN mode, we can use [1,-1,2,3] ` {3,3}` DIAG to obtain the same result as above. Another example of application of the DIAG→ function follows, in ALG mode: In RPN mode, use [1,2,3,4,5] ` {3,2}` DIAG . In this case a 3×2 matrix was to be created using as main diagonal elements as many elements as possible form the vector [1,2,3,4,5]. The main diagonal, for a rectangular matrix, starts at position (1,1) and moves on to position (2,2), (3,3), etc. until either the number of rows or columns is exhausted. In this case, the number of columns (2) was exhausted before the number of rows (3), Page 10-13