HP 5600 TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide - Page 19
Flex the rail out slightly to allow the brace to be inserted. Align the screw - rails
UPC - 720591607586
View all HP 5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installation 3. Attach the brace assembly to each mounting rail with the cable access hole facing the right side of the rack. a. Flex the rail out slightly to allow the brace to be inserted. Align the screw holes on the brace with the screw holes on the rails (1). b. Insert one 6-32 screw (2) on each side. c. Tighten the screws (3). 1 3 2 Figure 2-3: Attaching the brace to the mounting bracket NOTE: Make sure the cable access hole is positioned on the right, to allow appropriate routing of cables. 2-4 HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide
Installation
2-4
HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide
3.
Attach the brace assembly to each mounting rail with the cable access hole facing
the right side of the rack.
a.
Flex the rail out slightly to allow the brace to be inserted. Align the screw
holes on the brace with the screw holes on the rails (1).
b.
Insert one 6-32 screw (2) on each side.
c.
Tighten the screws (3).
1
3
2
Figure 2-3:
Attaching the brace to the mounting bracket
NOTE:
Make sure the cable access hole is positioned on the right, to allow appropriate
routing of cables.