HP 6125G HP 6125G & 6125G/XG Blade Switches IRF Command Reference-R210 - Page 17
irf-port, irf-port-configuration active, Examples, Syntax, Default level, Parameters, Description
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Examples # Log in to the CLI of IRF member switch 2. system-view [Sysname] irf switch-to 2 irf-port Syntax irf-port member-id/port-number View undo irf-port member-id/port-number System view Default level 3: Manage level Parameters member-id/port-number: Specifies an IRF port number. The member-id argument represents the IRF member ID. The port-number argument represents the index of the port on the member switch, and must be 1 or 2. Description Use irf-port to enter IRF port view. Use undo irf-port to remove all port bindings on an IRF port. To set up an IRF link between two switches, you must enter IRF port view to bind physical ports to the IRF port used by each switch for IRF connection. Before removing all port bindings on an IRF port, shut down all its physical ports. Related commands: port group interface. Examples # Bind Ten-GigabitEthernet 3/1/1 to IRF-port 1 on member device 3. system-view [Sysname] interface ten-gigabitethernet 3/1/1 [Sysname-Ten-GigabitEthernet3/1/1] shutdown [Sysname-Ten-GigabitEthernet3/1/1] quit [Sysname] irf-port 3/1 [Sysname-irf-port3/1] port group interface ten-gigabitethernet 3/1/1 [Sysname-irf-port3/1] quit [Sysname] interface ten-gigabitethernet 3/1/1 [Sysname-Ten-GigabitEthernet3/1/1] undo shutdown irf-port-configuration active Syntax irf-port-configuration active 14