HP 6125G HP 6125G & 6125G/XG Blade Switches IRF Command Reference-R210 - Page 9
display switchover state, Syntax, Default level, Parameters, Description, Examples
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Field MAD ARP enabled interface: Vlan-interface2 MAD enabled aggregation port: Bridge-Aggregation1 MAD BFD enabled interface Vlan-interface3 mad ip address 3.3.3.1 255.255.255.0 member 1 mad ip address 3.3.3.2 255.255.255.0 member 2 Description Interface where ARP MAD is enabled. Aggregate interface where LACP MAD is enabled. Interface where BFD MAD is enabled. VLAN interface used for BFD MAD, and the MAD IP address configured for each member on this interface. display switchover state Syntax View display switchover state [ slot member-id ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters slot member-id: Specifies an IRF member by its member ID. If no IRF member is specified, this command displays the master/subordinate switchover states of the master. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display switchover state to display the master/subordinate switchover states of IRF member switches. Examples # Display the master/subordinate switchover states of the master. display switchover state Master HA State to slot 2: Slave is absent. Master HA State to slot 3: Realtime backup to slave. Master HA State to slot 4: Waiting batch backup request from slave. 6