HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch CIM Agent Refer - Page 23
Local/Remote Property contains the switch WWN., Local/Remote Property is NULL.
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Supported properties and methods CreationClassName Property contains the string QLGC_FCPort. DeviceID Opaque identifier SystemCreationClassName • (Local/Remote) Property contains the string QLGC_FCSwitch. • (NS)Property contains the string QLGC_Fabric. SystemName • (Local/Remote) Property contains the switch WWN. • (NS) Property contains the WWN of the principal switch in the fabric. ElementName Property contains a user friendly string identifying the port. The property may be modified for ports local to the switch if the associated FCPortCapabilities.ElementNameEditSupported property is TRUE. • (Local/Remote) Port • (NS) Port Symbolic Name, if any, was registered with Nameserver. LinkTechnology Property contains the enumerated value 4 = FC (FibreChannel). NetworkAddresses • (Local/Remote) Property is NULL. • (NS) Property contains the FibreChannel address identifier (FCID) formatted as six uppercase hex digits. OperationalStatus An array containing a single value as follows. It represents the operational status of the port, not the configured port settings. Supported values are: (Local/Remote) • 00-Unknown: Remote port state is unknown, and/or the port is not installed. • 02-OK: Port is ONLINE and passing traffic. • 06-Error: Error trying to link to remote device or switch, or boot diagnostic error. • 10-Stopped: Port is operationally OFFLINE as a result of either not being connected to anything, or as a result of being disabled (configured OFFLINE or DOWN). • 11-InService: Port has been configured to a diagnostic state. (NS) • 0-Unknown PermanentAddresses Property contains the port WWN. PortType Port Type represents the value negotiated during the port login procedure. It does not represent the configured port type. Supported values are: • 00-Unknown: (Local/Remote) G/GL port is not linked, or data is unknown • 10-N: (NS) Node port • 11-NL: (NS) Node port is in FC-AL mode • 14-E: (Local/Remote) Fabric Expansion port is linked to another switch • 15-F: (Local/Remote) Fabric port is linked to an N port • 16-FL: (Local/Remote) Fabric port is linked to one or more NL ports via FC-AL • 16000-Donor: (Local) Port is in Donor Mode and is unusable HP StorageWorks 8/20q and SN6000 Fibre Channel Switch CIM Agent Reference Guide 23