HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch CIM Agent Refer - Page 39

Multiple zones (or zone aliases) may contain identical zone members, effectively identifying the same zoning element (port, device, etc.). In this case, only one instance of the zone member is reported, however it is associated with multiple zones (or zone aliases). The exception to this rule is that active zones are never associated with inactive zone members; neither are inactive zone members associated with active zones. Supported properties and methods InstanceID Opaque ConnectivityMemberType Property contains the enumerated type of the zone member. • 02-Permanent Address: Fabric Device Port WWN • 03-Network Address: Fabric Device Port Fibre Channel address • 04-Switch Port ID: Switch Domain / Port ConnectivityMemberID Property contains a formatted string identifying the zone member. The format is dependent on the ConnectivityMemberType. MemberType: String Format/Example: • Permanent Address: 16 uppercase hex digits / 2100002037730526 • Network Address: 6 uppercase hex digits / 0B04E4 • SwitchPort ID: D:P where D is the switch domain and P is the switch port (area). Both values are base10. / 3:122 Supported WBEM operations • getClass • getInstance • deleteInstance • enumerateInstances • enumerateInstanceNames Associations • QLGC_ZoneElementSettingData : CIM_ElementSettingData-Many-to-Many relationship to QLGC_Zone • QLGC_ZoneAliasElementSettingData : CIM_ElementSettingData-Many-to-Many relationship to QLGC_ZoneAlias HP StorageWorks 8/20q and SN6000 Fibre Channel Switch CIM Agent Reference Guide 39