HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch installation and reference
HP 8/20q Manual
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 8/20q manual content summary:
- HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 1
HP StorageWorks 8/20q Fibre Channel Switch installation and reference guide Part number: 5697-7196 First edition: February 2008 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 2
from QLogic Corporation. All rights reserved. The information contained herein is subject to change without notice. The only warranties for HP products and services are or registered trademarks of Netscape Communications Corporation. 8/20q Fibre Channel Switch installation and reference guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 3
switch fabrics 21 Optimizing device performance 21 Domain ID, principal priority, and domain ID lock 22 Common topologies 22 Switch services 22 Fabric security 23 Connection security 24 User account security 24 Port binding 25 8/20q Fibre Channel Switch installation and reference guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 4
port 33 Apply power to the switch 34 Connect the management station or workstation to the switch 35 Configure the switch 35 Simple SAN Connection Manager switch configuration 35 QuickTools switch configuration 35 CLI switch configuration 36 Cable devices to the switch 36 Installing firmware - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 5
12 Installing the filler panel 32 13 Management station and workstation cable connections 35 14 Switch LEDs 41 15 Logged-in LED 44 16 Class 1 laser product label 50 Tables 1 Document conventions 8 2 Serial port pin identification 16 8/20q Fibre Channel Switch installation and reference guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 6
8/20q Fibre Channel Switch rack mount kit hardware 30 8 General specifications 55 9 Maintainability features 56 10 Fabric management specifications 57 11 Switch physical dimensions 57 12 Electrical specifications 57 13 Environmental requirements 58 14 Switch configuration defaults 59 15 Port - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 7
• HP StorageWorks 8/20q Fibre Channel Switch CIM Agent reference guide For the latest product information, including firmware, documentation, and supported SAN configurations, visit the following HP web site: http://www.hp.com/go/8Gb-SSC. 8/20q Fibre Channel Switch installation and reference guide 7 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 8
blue, underlined text (http://www.hp.com) Bold font Italics font Monospace font Monospace, italic font Element Cross-reference links and e-mail addresses Web site IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 9
of drivers, and firmware documentation updates as well as instant access to numerous other product resources. • After signing up, you can quickly locate your products by selecting Business support and then Storage under Product Category. 8/20q Fibre Channel Switch installation and reference guide 9 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 10
sites For other product information, see the following HP web sites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/support/ • http://www.docs.hp.com Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 11
HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide. • For information about Simple SAN Connection Manager, see the HP StorageWorks Simple SAN Connection Manager user guide. Figure 1 8/20q Fibre Channel Switch 8/20q Fibre Channel Switch installation and reference guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 12
port LEDs, see "Port LEDs" on page 14. The Maintenance button (Figure 2) is the only switch control. It is used to reset a switch or to recover a disabled switch. To apply power to the switch, plug the power cord into the switch a fault exists in the switch firmware or hardware. Fault conditions - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 13
release the button. The Heartbeat LED illuminates continuously while the switch is in maintenance mode. To exit maintenance mode and return to normal operation, press and release the Maintenance button momentarily to reset the switch. 8/20q Fibre Channel Switch installation and reference guide 13 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 14
3 Fibre Channel ports The 8/20q Fibre Channel Switch comes from the factory as an 8- or 16-port switch, enabling ports 0-7 or 0-15 respectively. You can enable additional ports up to the 20-port maximum using the HP StorageWorks 8/20q 4-port Upgrade License. For more information, see "Installing - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 15
when an Ethernet connection has been established. The Activity LED illuminates when data is being transmitted or received over the Ethernet connection. 12 3 1 Activity LED 3 RJ-45 Ethernet port Figure 5 Ethernet port 2 Link status LED 8/20q Fibre Channel Switch installation and reference guide 15 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 16
port The 8/20q Fibre Channel Switch is equipped with an RS-232 serial port for maintenance purposes (Figure 6). You can manage the switch through the serial port using the CLI. 2 1 1 Serial port 2 RS-232 connnector pin identification Figure 6 Serial port and pin identification The serial port - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 17
the switch and the workstation. These files include firmware image files, configuration files, and log files. For more information about FTP and TFTP, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 8/20q Fibre Channel Switch installation and reference guide 17 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 18
18 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 19
of ports that are needed and in turn the number of switches. Consider the transmission speeds of your HBAs and SFPs. The switch supports 2-Gb zone set can be active at one time. The active zone set determines the current fabric zoning. 8/20q Fibre Channel Switch installation and reference guide 19 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 20
of members in a zone (2,000). MaxMembersPerAlias Maximum number of members in an alias (2,000) Performance The 8/20q Fibre Channel Switch supports class 2 and class 3 Fibre Channel service at transmission rates of 8-Gb/s with a maximum frame size of 2,148 bytes. Related performance characteristics - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 21
8/20q 4-port Upgrade License activates additional Fibre Channel ports to 12, 16, or 20 ports. Applying a license key is not disruptive, nor does it require a switch reset. To order a license key, contact your switch distributor or your authorized reseller. For more information, see "Installing - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 22
set to 254. For information about changing the default domain ID, domain ID lock, and principal priority parameters, see the set config switch command in the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. If you connect a new switch to an existing fabric with its domain ID - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 23
switch and the workstation. Enabling SSL automatically creates a security certificate on the switch. The default is disabled. NOTE: Simple SAN Connection Manager version 1.0 does not support the SSL service changes to the fabric. 8/20q Fibre Channel Switch installation and reference guide 23 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 24
certificate CLI command. For information about the create certificate CLI command, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. NOTE: Simple SAN Connection Manager version 1.0 does not support the SSL service. If SSL is enabled, you will be unable to manage the - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 25
just the switch or both the switch and the initiator device if the device supports authentication. When using a RADIUS server, every switch in the , see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 8/20q Fibre Channel Switch installation and reference guide 25 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 26
switch firmware and provide for the management of individual switches in a single fabric. Consider how many fabrics and switches will be managed, how many workstations are needed, and whether the fabrics will be managed with Simple SAN Connection Manager, QuickTools, or the CLI. A switch supports - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 27
Explorer 5.0 or later Netscape Navigator 6.0 and later Mozilla 1.5 and later Firefox 1.0 and later Java Runtime Environment 1.5 or higher Hardware CD ROM drive RJ-45 Ethernet port PCI-e slots for the HP StorageWorks PCI-e FC HBA 8/20q Fibre Channel Switch installation and reference guide 27 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 28
HP StorageWorks 8/20q Fibre Channel Switch Rack-Mount Kit quick start installation instructions • HP StorageWorks 8/20q Fibre Channel Switch quick start installation instructions • One HP StorageWorks Simple SAN Connection Manager software CD • One HP StorageWorks 8/20q Fibre Channel Switch • One HP - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 29
same AC supply circuit may overload that circuit or the AC supply wiring. Consider the power source capacity and the total power usage of all switches on the circuit. • Reliable grounding in the rack must be maintained. 8/20q Fibre Channel Switch installation and reference guide 29 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 30
kit installation requires one technician. Locate the following items and set them aside: • 8/20q Fibre Channel Switch • 8/20q Fibre Channel Switch #2 Phillips screwdriver • 7/16-inch wrench Verify the kit contents Check the contents of the 8/20q Fibre Channel Switch rack mount kit shipping carton - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 31
the rails are on the power-supply side (not the SFP-port side) of the switch. Figure 7 Attaching the rails to the switch 3. On the rack vertical posts, mark the holes that rack posts. Figure 9 Installing the switch and rail assembly 8/20q Fibre Channel Switch installation and reference guide 31 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 32
rail to the rear mounting bracket 7. Optional: Fasten the filler panel to the rear mounting brackets with two M6 machine screws (Figure 12). Figure 12 Installing the filler panel 32 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 33
an icon in the Connection Description window. Click OK. c. Enter the following COM Port settings in the COM Properties window, and click OK. • Bits per second: 9,600 • Data Bits: 8 • Parity: None • Stop Bits: 1 • Flow Control: None 8/20q Fibre Channel Switch installation and reference guide 33 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 34
Canadian Standards Association (CSA). • For 250 Volt electrical service: The cable must be rated at 10 Amps, meet the requirements of H05VV-F, and be approved by Verband der Elektrotechnik (VDE), SEMKO, and DEMKO. To power up a 8/20q Fibre Channel Switch, attach the AC power cord to the receptacle - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 35
and enter the default IP address 10.0.0.1 to start the QuickTools web applet. 2. Log in to the switch using the default user name (admin) and password (password). 3. Obtain the IP address and subnet mask from your network administrator. 8/20q Fibre Channel Switch installation and reference guide 35 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 36
the values you want for switch IP address (EthNetworkAddress) and the network mask (EthNetworkMask). For more information about CLI commands, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set setup system - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 37
enter the hotreset command to perform a non-disruptive activation. See "Custom firmware installation" on page 39. For information about the CLI commands, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 8/20q Fibre Channel Switch installation and reference guide 37 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 38
the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 1. Enter the following commands to download the firmware from a remote host to the switch, install the firmware, then reset the switch to activate the firmware. 8/20q FC Switch #> admin start 8/20q FC Switch #> firmware - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 39
-switch links (ISL), but do not connect the devices. 4. Configure the port types for the new switch. The ports can be G_Port, GL_Port, F_Port, FL_Port, or Donor. 5. Connect the devices to the switch. 6. Make any necessary zoning changes. 8/20q Fibre Channel Switch installation and reference guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 40
Get Description to display the upgrade description. 5. Click Add to upgrade the switch. Allow a minute or two for the upgrade to complete. To upgrade a switch using the command line interface, see the feature command in the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. 40 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 41
troubleshooting Diagnostic information about the switch is available through the switch LEDs and the port LEDs. Diagnostic information is also available through the CLI, QuickTools, or Simple SAN your authorized maintenance provider. 8/20q Fibre Channel Switch installation and reference guide 41 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 42
boot firmware in Programmable read-only memory (PROM) and the switch firmware in flash memory • Internal data loopback test on all ports • the switch to operate, but disables the ports that have errors. If two or more ports fail the POST, the entire switch is disabled. Whether the problem is - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 43
remains, continue. 2. Consider the ambient air temperature near the switch and clearance around the switch. Make necessary corrections. If the condition remains, power down the switch and contact your authorized maintenance provider. 8/20q Fibre Channel Switch installation and reference guide 43 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 44
alarm about an invalid attach on the affected port? • Yes-If you have configured device security, review the ISL group in the active security set to ensure that the membership includes the necessary ports and that the secrets on all switches are correct. • No-Continue. 2. Does the QuickTools event - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 45
port, changing its operational state to "down." Port errors can be caused by the following: • Triggers are too low or the sample window is too small • Faulty Fibre Channel port cable • Faulty SFP • Faulty port • Faulty device or HBA 8/20q Fibre Channel Switch installation and reference guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 46
loopback test to validate the port and the SFP. For information about testing ports, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide or the HP StorageWorks 8/20q Fibre Channel Switch QuickTools switch management user guide. Does the port pass the test? • Yes-Continue - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 47
on page 59. Resetting user accounts in maintenance mode (option 3) The Reset User Accounts to Default option restores the password for the Admin account name to the default (password) and removes all other user accounts from the switch. 8/20q Fibre Channel Switch installation and reference guide 47 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 48
files from the switch, see the HP StorageWorks 8/20q Fibre Channel Switch command line interface guide. Removing the switch configuration in maintenance mode (option 5) The Remove Switch Config option deletes all configurations from the switch except the default configuration. This restores - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 49
if not installed and used in accordance with the instruction manual, may specified herein. • Allow only HP authorized service technicians to repair the laser fiber optic conductors. The U.S. Department of Health and Human Services manual. 8/20q Fibre Channel Switch installation and reference guide 49 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 50
a laser internal to the fiber optic (FO) transceiver for connection to the Fibre Channel communications port. In the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements contained in the Department of Health and Human Services (DHHS) regulation 21 CFR - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 51
telecomunications products. *Notified body number (used only if applicable- refer to the product label) Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany Japanese notice Korean notice Taiwan notice \ 8/20q Fibre Channel Switch installation and reference guide 51 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 52
52 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 53
any of the suggested equipment for proper grounding, have an HP authorized reseller install the part. NOTE: For more information on static electricity, or for assistance with product installation, contact your HP authorized reseller. 8/20q Fibre Channel Switch installation and reference guide 53 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 54
54 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 55
GL_Port, F_Port, FL_Port, E_Port Port characteristics All ports are auto-discovering and self-configuring. Number of Fibre Channel ports Available as 8-port and 16-port base models with license key upgrades to 12, 16, and 20 ports. 8/20q Fibre Channel Switch installation and reference guide 55 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 56
switches, depending on configuration. For the latest supported configurations, see the SAN Design Reference Guide available at http://www.hp.com/go/SANdesignguide. Maximum user ports > 475,000 ports depending on configuration. For the latest supported configurations, see the SAN Design Reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 57
20q Fibre Channel Switch. Table 10 Fabric management specifications Specification Description Management methods Command Line Interface FTP GS-3 Management Server Simple SAN 1 A at 120 VAC/0.5 A at 240 VAC 100 watts Internally fused 8/20q Fibre Channel Switch installation and reference guide 57 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 58
Environmental requirements To ensure proper operation, the switch must not be subjected to environmental conditions beyond those for which it was tested. , 10 minutes 5-500 Hz, random, 2.1 Grms, 10 minutes Shock (IEC 68-2-7) 4 g, 11ms, 20 repetitions 30 g, 292 ips, 13 msec, 3 square waves 58 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 59
FDMIEnabled True FDMIEntries 1,000 DefaultDomainID 1 (0x Hex) DomainIDLock False SymbolicName 8/20q FC Switch R_A_TOV 10000 E_D_TOV 2000 PrincipalPriority 254 ConfigDescription Config Default InteropMode Standard 8/20q Fibre Channel Switch installation and reference guide 59 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 60
configuration Enter the show config port CLI command to display port configuration values. Table 15 Port configuration defaults Parameter Port Defaults AdminState Online LinkSpeed Auto PortType GL SymbolicName Port n, where n is the port number ALFairness False DeviceScanEnabled True - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 61
applied. Table 16 Port threshold alarm configuration defaults Parameter Default ThresholdMonitoringEnabled False configuration defaults Parameter Default MergeAutoSave True DefaultZone Allow DiscardInactive False 8/20q Fibre Channel Switch installation and reference guide - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 62
18 SNMP configuration defaults Parameter Default SNMPEnabled True Contact Location Description HP StorageWorks 8/20q Fibre Channel Switch Trap [1-5] Address Trap 1: 10.0.0.254; Traps 2-5: 0.0.0.0 Trap [1-5] Port 162 Trap [1-5] Severity - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 63
Default DeviceAuthOrder Local UserAuthOrder Local TotalServers 0 DeviceAuthServer False UserAuthServer False AccountingServer False ServerIPAddress 10.0.0.1 ServerUDPPort 1812 Timeout 2 seconds Retries 0 SignPackets False 8/20q Fibre Channel Switch installation and reference - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 64
to display call home configuration values. Table 23 Call Home service configuration defaults Parameters Default PrimarySMTPServerAddr 0.0.0.0 PrimarySMTPServerPort 25 PrimarySMTPServerEnabled False SecondarySMTPServerAddr 0.0.0.0 SecondarySMTPServerPort 25 SecondarySMTPServerEnabled - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 65
or storage device. Fabric device An interface by which device host bus adapters (HBAs) can be managed through the management interface fabric. (FDMI) Fabric management switch The switch through which the fabric is managed. 8/20q Fibre Channel Switch installation and reference guide 65 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 66
synchronize its time with a server. (NTP) NL_Port Node loop port. A Fibre Channel device port that supports arbitrated loop protocol. Pending firmware The firmware image that will be activated upon the next switch reset. Port binding An authorization method that defines a list of device WWNs - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 67
of information. Zone set A set of zones grouped together. The active zone set defines the zoning for a fabric. See Zone. Zoning database The set of zone sets, zones, and aliases stored on a switch. See Alias, Zone, and Zone set. 8/20q Fibre Channel Switch installation and reference guide 67 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 68
68 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 69
39 description 17 service 23 firmware description 36 failure 42 install with CLI 37, 38 install with QuickTools 37 non-disruptive activation 37 unpack image 47 FL_Port 15 flash memory 13 frame size 56 FRU - See Field Replaceable Unit 8/20q Fibre Channel Switch installation and reference guide 69 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 70
O operating systems 27, 28 over-temperature 43 P password file reset 47 maintenance mode 46 restore default 47 performance device 21 switch 20 planning 19 port binding 25 buffer credits 20 characteristics 55 diagnostics 44 Ethernet 15 fabric 15 Fibre Channel 14 generic 15 LEDs 14 maximum number of - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 71
10 HP Subscriber's choice 9 workstation configuration 33 connecting 35 IP address 33 operating system 15 requirements 27 Z zone conflict 45 definition 19 zone set active 19 definition 19 zoning database 20 hardware-enforced 19 limits 20 8/20q Fibre Channel Switch installation and reference guide 71 - HP 8/20q | HP StorageWorks 8/20q Fibre Channel Switch installation and reference - Page 72
HP StorageWorks
8/20q Fibre Channel Switch installation and
reference guide
Part number: 5697-7196
First edition: February 2008