HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Manageme - Page 52
web applet, Enterprise Fabric Management Suite, and CIM sessions
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Table 8 Switch data window fields (Continued) Field NTP Client Enabled Description Allows switches to synchronize their time to a centralized server. Enabled or Disabled. NTP Server Address The IP address of the centralized NTP server. Ethernet connection to NTP server is required. FDMI Enable Fabric Device Management Interface status. If enabled, device information can be obtained, managed, and saved through the fabric using Name Service Management Server functions. If FDMI is Enabled on the entry switch, QuickTools reports all FDMI information reported by the entry switch. FDMI HBA Entry Limit Maximum number of HBAs that can be registered with a switch. Embedded GUI Enabled QuickTools web applet status. Indicates whether the web applet on the switch is Enabled or Disabled. Inactivity Timeout Number of minutes the switch waits before terminating an idle command line interface (CLI) session. Zero (0) disables the timeout threshold. GUI Mgmt Enabled Telnet Enabled Management application status. If Disabled, the switch cannot be managed using QuickTools or Enterprise Fabric Management Suite. Telnet client status Enabled or Disabled. SSH Enabled Secure Shell status. If Enabled, an encrypted data path is provided for command line interface sessions. SSL Enabled Secure Sockets Layer status. If enabled, encryption for the QuickTools web applet, Enterprise Fabric Management Suite, and CIM sessions is provided. CIM Enabled Common Interface Model status. The CIM agent is based on the Storage Networking Industry Association (SNIA) Storage Management Initiative Specification (SMI-S), which is the standard for SAN management in a heterogeneous environment. FTP Enabled FTP status Enabled or Disabled. Management Server Enabled Management server status Enabled or Disabled. SNMP Enabled SNMP status, Enabled or Disabled. Call Home Enabled Call Home status. If enabled and configured, switches can send alerts to pagers and e-mail. Users can configure the type of events and where the alerts are sent. Zones/Security Group Interop Mode Standard Legacy Address Format None Merge Auto Save If Enabled, any zoning updates from the fabric are saved in permanent (non-volatile) memory as well as temporary memory. If Disabled, any zoning updates from the fabric are saved only in temporary memory and are lost after a switch reset. Default Zone Enables or disables communication between ports and devices not defined in the active zone set, or when there is no active zone set. Discard Inactive Automatically removes the previously active zone set when a zone set is activated on a switch. 52