HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Manageme - Page 69
SNMP v3 User Editor dialog box, Modifying an SNMP v3 user
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 33 SNMP v3 User Editor dialog box Table 13 SNMP v3 User Editor dialog box fields Field Description User Name Name assigned to this SNMP v3 user. Group Sets user's Read privileges: Read Only permits user to view only SNMP v3 user settings, Read Write permits user to view and change SNMP v3 user settings. Authentication Type None, MD5, SHA. If None, no authentication phrase is required. MD5 and SHA require an authentication phrase. Authentication Phrase A unique string or phrase that functions as a password that verifies the authenticity of the user. Confirm Authentication Phrase Re-enter the Authentication Phrase to confirm it. Privacy Type Privacy Phrase DES or None. If None, no privacy phrase is required. A unique string or phrase that functions as a password that verifies the privacy of the user. Confirm Privacy Phrase Re-enter the Privacy Phrase to confirm it. Modifying an SNMP v3 user To modify an SNMP v3 user: 1. Select the entry switch in the fabric tree. 2. Select Switch > SNMP > SNMP v3 Manager to open the SNMP v3 Manager dialog box (Figure 32). 3. Select a user in the user list, and select Edit > Edit User to open the SNMP v3 User dialog box. 4. Modify the entries as needed, and click OK. For information about the entry fields, see Table 13. 5. Click OK to save the settings and close the SNMP v3 User Editor dialog box. 6. In the SNMP v3 Manager dialog box, click OK to save and activate the SNMP v3 security configuration. HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Management User Guide 69