HP 8/20q HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Manageme - Page 99
Port Diagnostics dialog box, Enter a frame size the default is 256.
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
NOTE: The online port diagnostic test is not allowed on a TR_Port. If attempted, an error message is displayed stating that an online port diagnostic test is not allowed on a TR port. Figure 53 Port Diagnostics dialog box To test a port: 1. Select one or more ports In the faceplate display. 2. Select Port > Port Diagnostics. 3. Choose one of the following options: • Select Online Port Diagnostics to open the Port Diagnostics dialog box. Select the port to test from the Select Port drop-down list. The test type is Online, by default. • Select Other Port Diagnostics to open the Port Diagnostics dialog box. Select the port number, and then select Internal or External test type from the drop-down list. 4. Enter a frame size (the default is 256). 5. Enable or disable the Terminate Test Upon Error option. 6. Select a Loop Count option: The Loop Forever option runs the test until you click Stop Test. The Loop Count option runs the test a specific number of times. 7. Select a Test Pattern option: Accept the default test pattern, or select the User-Defined option and enter a value. 8. Click Start Test to begin the test. Observe the results in the Test Results area. NOTE: If the Test Status field in the Test Results area indicates Failed, note the Test Fault Code displayed in the Port Information data window and contact Tech Support. HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Management User Guide 99