HP 8/20q HP StorageWorks Simple SAN Connection Manager User Guide (5697-0633, - Page 24
Removing Simple SAN Connection Manager in Linux, linux, mnt/cdrom, install_smb.sh, uninstall
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
A message box asks if you are sure you want to remove the program. 3. Click Yes to proceed with program removal, or No to cancel. The program removal progress window opens and monitors the product removal. A progress bar shows the percent of the uninstallation completed and icons show the status of each component as it is removed, for example: • A icon next to the component name indicates successful removal. • A icon next to the component indicates that it has not yet been removed. • A icon indicates that an error occurred during removal of this component. When program removal is complete, you must reboot the computer. 4. Remove the Simple SAN Connection Manager CD from the CD-ROM drive. 5. Ensure that all running programs are closed, and then click Reboot to restart the computer. Removing Simple SAN Connection Manager in Linux Follow these steps to remove the Simple SAN Connection ManagerSimple SAN Connection Manager software on a server running Linux. CAUTION: If the system is booted from your SAN using the QLogic FC HBA driver, use the Linux uninstallation option cautiously. Your QLogic FC HBA drivers will also be removed from the system, thus making it un-bootable because the drivers are removed from the Linux initial RAM disk (initrd), the temporary file system used by the Linux kernel during boot. 1. Insert the installation CD into the CD-ROM drive of the server. The installation CD should mount automatically in one of the following locations: /media/cdrom/ /mnt/cdrom/ /media/cdrecorder/ If the installation CD is not mounted automatically, then issue the following commands to mount the CD: # mkdir -p /mnt/cdrom # mount /dev/cdrom /mnt/cdrom 2. Change directory to the linux directory. For example, if the installation CD is mounted in /mnt/cdrom, issue the following command: # cd /mnt/cdrom/HP_SSCM/linux/ 3. Run the install_smb.sh script with the uninstall option as follows: # ./install_smb.sh --uninstall This will remove the following components: • QLogic FC HBA Driver • HP Array Configuration Utility, if installed • QLogic SANsurfer agent, QLRemote, if installed 24 Installing, Upgrading, and Removing Simple SAN Connection Manager