HP 8/20q HP StorageWorks Simple SAN Connection Manager User Guide (5697-0633, - Page 33
Second step of New Switch Setup completed, The Set the Switch Default Zoning dialog - default password
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Figure 15 Set Switch Admin Password dialog box: new switch setup 8. In the Set Switch Admin Password dialog box, complete the following steps: a. Enter the Old Password (the factory default password for the switch is password). b. Enter a New Password (at least 8 alphanumeric characters). c. Re-enter the new password in the Verify Password box. d. To set the switch admin password, click OK. To cancel password setup, click Cancel. 9. A message box confirms successful password change completion. Click OK to close the message box. The New Switch Setup dialog box shows a check mark next to the second step, "Set switch administrator password," (Figure 16) indicating that you have completed that task. Figure 16 Second step of New Switch Setup completed 10. A message box asks if you want to set the switch zoning. Choose one of the following options: • To continue with the next step of switch setup, click Yes. The Set the Switch Default Zoning dialog box (Figure 17) opens. Go to step 9. • To set the switch zoning later, click No. (See "Setting the switch default zoning," page 49.) HP StorageWorks Simple SAN Connection Manager User Guide 33