HP 8/20q HP StorageWorks Simple SAN Connection Manager User Guide (5697-0633, - Page 32
The Set Switch Admin Password dialog box - default ip
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5. Choose one of the following options: • To continue with the first step (setting the switch IP address), click OK. The Set Switch IP Address dialog box (Figure 13) opens. Go to step 6. • To skip the switch setup for now, click Cancel. (To set up the switch later, see the procedures in "Managing Switches," page 45. If you do not complete switch set up before you exit Simple SAN Connection Manager, the New Switch Setup dialog box will open again the next time you start the application.) The Set Switch IP Address dialog box (Figure 13) shows the switch name and default IP address. Figure 13 Set Switch IP Address dialog box: new switch setup 6. Select either the Enable IPv4 or Enable IPv6 check box, and then complete the appropriate IPv4 or IPv6 information (for details, see "Setting the switch IP address," page 51). Click OK. The New Switch Setup dialog box shows a check mark next to the first step, "Set switch IP address," (Figure 14) indicating that you have completed that task. Figure 14 First step of New Switch Setup completed 7. A message box asks if you want to change the factory default switch administrator password. Choose one of the following options: • To continue with the next step of switch setup, click Yes. The Set Switch Admin Password dialog box (Figure 15) opens. Go to step 8. • To change the default password later, click No. (See "Setting the switch admin password," page 51, for a procedure for changing the switch admin password-either the default or the current password-to a new password.) 32 Getting Started