HP 8/20q HP StorageWorks Simple SAN Connection Manager User Guide (5697-0633, - Page 55
Setting switch SNMP properties, Switch Firmware Update wizard
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
7. In this dialog box, complete these steps: a. Enter the user name and password. b. (Optional) If you want the firmware update to take affect immediately, rather than after the switch power is recycled, select the Apply the new firmware image immediately after successful update check box. c. Click OK. 8. Repeat steps 4 through 7 for each switch you want to update, and then continue with step 9. 9. On the completed Switch Firmware Update wizard window (Figure 35), click Next. Figure 35 Switch Firmware Update wizard 10. To complete the wizard, choose one of the following options: • To confirm and proceed with the firmware update, click Finish. • To change your selections for the firmware update, click Back. • To stop the firmware update, click Cancel. If you clicked Finish, a message may inform you that the switch firmware is ready to be updated. The process takes several minutes per switch and cannot be canceled. Also, switch traffic may be temporarily disrupted. 11. Click Yes when prompted to update the switch firmware. Setting switch SNMP properties Use the SNMP Properties dialog box to define how authentication traps are managed and set for the switch. SNMP is the protocol that governs network management and monitoring of network devices. SNMP security consists of a read community string and a write community string, which are basically the passwords that control read and write access to the switch. HP StorageWorks Simple SAN Connection Manager User Guide 55