HP 8/40 Brocade Access Gateway Administrator's Guide v6.3.0 (53-1001345-01, Ju - Page 41
Displaying the list of allowed devices on the switch, ADS policy considerations
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Automatic Port Configuration policy 3 Displaying the list of allowed devices on the switch 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the ag --adsshow command. switch:admin> ag --adsshow F_Port WWNs Allowed 1 ALL ACCESS 3 20:03:08:00:88:35:a0:12 21:00:00:e0:8b:88:01:8b 9 20:03:08:00:88:35:a0:12 21:00:00:e0:8b:88:01:8b 10 ALL ACCESS 11 NO ACCESS 12 NO ACCESS 13 ALL ACCESS ADS policy considerations The following are considerations for setting the ADS policy: • In cascading configurations, you should set the ADS policy on the AG module that directly connects to the servers. • ADS policy can be enabled or disabled independent of status of other AG policies. Upgrade and downgrade considerations for the ADS policy Downgrading to Fabric OS v6.2.0 or earlier is supported. Upgrading from 6.2.0 to 6.3.0 or downgrading from 6.3.0 to 6.2.0 will not change the APC policy settings. Automatic Port Configuration policy The automatic Port Configuration (APC) policy is disabled by default in Access Gateway. ACP provides the ability to automatically discover port types (host vs. fabric) and dynamically update the routing maps when a new connection is detected. This policy is intended for a fully hands-off operation of Access Gateway. APC dynamically maps F_ports across available N_ports so they are evenly distributed. For example, when a port on AG is connected to a Fabric switch, AG configures the port as an N_Port. If a host is connected to a port on AG, then AG determines that it is connected and configures the port as an F_Port and automatically maps it to an existing N_Port with the least number of F_Ports mapped to it. Access Gateway Administrator's Guide 21 53-1001345-01