HP 8/40 Brocade Access Gateway Administrator's Guide v6.3.0 (53-1001345-01, Ju - Page 75
Editing Company ID list if target devices on switch, Rejoining Fabric OS switches to a fabric
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Rejoining Fabric OS switches to a fabric 4 3. Enter the following commands to enable the Flat FCID mode: vsan vsan# suspend no vsan vsan# suspend 4. Press Ctrl-Z to exit. 5. Enter the following command to save the MDS switch configuration: copy run start NOTE If there are any device(s) in the VSAN that you suspend, it takes that device offline until you unsuspend that VSAN. Editing Company ID list if target devices on switch If there are target devices on the switch, you must add the OUI of all the target devices present on the switch to the Company ID list, and then delete the OUI IDs of all the HBAs that are connected through the switch in Access Gateway mode from the Company ID list. You must remove the OUI IDs if and only if they are in the Company ID list. Use the following commands to determine if the OUIs in the Company ID list: switch#_show fcid-allocation area FCID area allocation company id info: 00:50:2E