HP AiO400r HP StorageWorks All-in-One Storage System User Guide (440583-006, J - Page 24
Using the direct attach method, Using the remote browser method
View all HP AiO400r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Using the direct attach method You can access the All-in-One Management Console using a monitor, mouse, and keyboard directly attached to the storage system. To connect the storage system to a network using the direct attach method 1. Log on to the HP All-in-One Storage System with the default user name administrator and the password hpinvent. The HP All-in-One Storage System Management Console and Rapid Startup Wizard start automatically. NOTE: You can change the administrator name and password when you configure the server using the Rapid Startup Wizard. See "Running the Rapid Startup Wizard" on page 32. 2. To complete network configuration using the Rapid Startup Wizard, see "Configuring the server on the network" on page 30. Using the remote browser method The storage system ships with DHCP enabled on the network port. If the server is placed on a DHCP-enabled network and the serial number of the device is known, the server can be accessed through a client running Internet Explorer 5.5 (or later) on that network using the TCP/IP 3202 port. IMPORTANT: Before you begin this procedure, ensure that you have the following: • Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the storage system • DHCP-enabled network • Serial number or IP address of the storage system To connect the server to a network using the remote browser method, you must first ensure that the client is configured to download signed ActiveX controls. To enable ActiveX controls 24 Installing and configuring the server