HP AiO400r HP StorageWorks All-in-One Storage System User Guide (440583-006, J - Page 46
SAS/SATA hard drive LEDs, Table 15 SAS and SATA hard drive LED combinations, Status
View all HP AiO400r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Figure 11 SAS/SATA hard drive LEDs Table 15 SAS and SATA hard drive LED combinations 1. Fault/UID LED (amber/blue) 2. Online/activity LED Status (green) Alternating amber and blue On, off, or flashing The drive has failed, or a predictive failure alert has been received for this drive; it also has been selected by a management application. Steadily blue On, off, or flashing The drive is operating normally, and it has been selected by a management application. Amber, flashing regularly (1 Hz) On A predictive failure alert has been received for this drive. Replace the drive as soon as possible. Off On The drive is online, but it is not active currently. Amber, flashing regularly (1 Hz) Flashing regularly (1 Hz) Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is part of an array that is undergoing capacity expansion or stripe migration, but a predictive failure alert has been received for this drive. To minimize the risk of data loss, do not replace the drive until the expansion or migration is complete. Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. Off Flashing regularly (1 Hz) The drive is rebuilding, or it is part of an array that is undergoing capacity expansion or stripe migration. Amber, flashing regularly (1 Hz) Flashing irregularly The drive is active, but a predictive failure alert has been received for this drive. Replace the drive as soon as possible. Off Flashing irregularly The drive is active, and it is operating normally. Steadily amber Off A critical fault condition has been identified for this drive, and the controller has placed it offline. Replace the drive as soon as possible. 46 Storage system components