HP CB016A User Guide

HP CB016A Manual

HP CB016A manual content summary:

  • HP CB016A | User Guide - Page 1
    HP Officejet Pro K8600 Printer series User Guide Podręcznik użytkownika
  • HP CB016A | User Guide - Page 2
  • HP CB016A | User Guide - Page 3
    HP Officejet Pro K8600 Printer series User Guide
  • HP CB016A | User Guide - Page 4
    Safety information 1. Read and understand all instructions in the documentation that comes with the HP Printer. 2. Use only a grounded electrical , see Maintain and troubleshoot. 9. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. Always follow basic
  • HP CB016A | User Guide - Page 5
    media 11 Understand specifications for supported media 12 Understand supported sizes 12 Understand supported media types and weights 16 Set minimum 21 To change settings (Mac OS 21 Use the HP Solution Center (Windows 22 Print with the rear manual feed slot 22 Print on both sides (duplexing 23
  • HP CB016A | User Guide - Page 6
    HP Printer Utility (Mac OS 32 To open the HP Printer Utility 32 HP Printer Utility panels 32 Network Printer Setup Utility (Mac OS 33 HP Web Jetadmin software 33 HP Instant Support To install the printer driver using Add Printer 40 To troubleshoot Supported ink cartridges ...45 Replace the ink
  • HP CB016A | User Guide - Page 7
    -panel lights 71 Interpreting network connector lights 76 A HP supplies and accessories Order printing supplies online 77 Accessories ...77 Supplies ...77 Ink cartridges ...77 Printheads ...78 HP media ...78 B Support and warranty Hewlett-Packard limited warranty statement 80 Obtain electronic
  • HP CB016A | User Guide - Page 8
    82 After the phone support period 82 Additional warranty options 83 HP Quick Exchange Service (Japan 83 Prepare the device for shipment 83 Remove the ink cartridges and printheads before shipment 83 Pack the device ...85 C Device specifications Physical specifications ...87 Product features and
  • HP CB016A | User Guide - Page 9
    use the device and to resolve problems. • Find other resources for the product • Accessibility • Understand the device parts Find other resources for the product You can obtain product information and further troubleshooting resources that are not included in this guide from the following resources
  • HP CB016A | User Guide - Page 10
    see To print the print quality diagnostic page. HP Web sites Provide the latest printer software, and product and support information. www.hp.com/support www.hp.com HP telephone support Lists information to contact HP. During the warranty period, this support is often free of charge. For more
  • HP CB016A | User Guide - Page 11
    doors, buttons, paper trays, and paper guides can be operated by users with limited strength and reach. Support For more details about the accessibility of this product and HP's commitment to product accessibility, visit HP's Web site at www.hp.com/accessibility. For accessibility information for
  • HP CB016A | User Guide - Page 12
    Chapter 1 (continued) 7 Ink cartridge door 8 Ink cartridges 9 Ink cartridge lights 10 Printhead lights 11 Printheads 12 Printhead latch Control panel For more information about interpreting control-panel lights, see Control-panel lights reference. 1
  • HP CB016A | User Guide - Page 13
    (continued) 3 Rear universal serial bus (USB) port 4 Rear access panel (for models with no duplexer) 5 Automatic two-sided printing accessory (duplexer) (available on some models) Understand the device parts 9
  • HP CB016A | User Guide - Page 14
    2 Install the accessories This section contains the following topics: • Install the duplexer Install the duplexer NOTE: This feature is available with some models of the device. For ordering information, see Accessories. You can print on both sides of a sheet of paper automatically when the optional
  • HP CB016A | User Guide - Page 15
    Load media • Change print settings • Use the HP Solution Center (Windows) • Print with the rear manual feed slot • Print on both sides (duplexing) information, see Understand specifications for supported media. • To prevent jams, poor print quality, and other printing problems, avoid the following
  • HP CB016A | User Guide - Page 16
    drying time and ensures that the ink dries completely before the next driver. You might need to reformat existing documents to print them correctly on custom-sized media. Understand specifications for supported media Use the Understand supported sizes and Understand supported media types and weights
  • HP CB016A | User Guide - Page 17
    Super B (330 x 483 mm; 13 x 19 inches) Tabloid (279.4 x 431.8 mm; 11 x 17 inches) Banner A3 (297 x 420 mm; 11.7 x 16.5 inches) Banner A4 (210 x 297 mm; 8.3 x 11.7 inches) Banner x 10 inches) Panorama (101.6 x 279.4 mm; 4 x 11 inches) Rear manual feed tray Automatic duplexer Select print media 13
  • HP CB016A | User Guide - Page 18
    x 241 mm; 4.13 x 9.5 inches) Monarch Envelope (98 x 191 mm; 3.88 x 7.5 inches) HP Greeting Card Envelope (111 x 152 mm; 4.38 x 6 inches) A2 Envelope (111 x 146 mm; inches) Borderless Hagaki* (100 x 148 mm; 3.9 x 5.8 inches) Photo media Rear manual feed tray Automatic duplexer 14 Use the device
  • HP CB016A | User Guide - Page 19
    Borderless photo media (8.5 x 11 inches) Borderless photo media (10 x 15 cm) Borderless Photo A3 (297 x 420 mm; 11.7 x 16.5 inches) Borderless Photo A4 (210 x 297 (3 to 13 inches wide and 5 to 19 inches long) Rear manual feed tray Automatic duplexer * The device is compatible with plain and inkjet
  • HP CB016A | User Guide - Page 20
    models. Tray Tray 1 Type Paper Weight 60 to 130 g/m2 (16 to 36 lb bond) Transparencies Photo media Labels Up to 280 g/m2 (75 lb bond) Envelopes Cards Rear manual feed tray Paper Transparencies Photo media Labels Envelopes Cards Duplexer Paper Output-bin All supported media 75 to 90 g/m2
  • HP CB016A | User Guide - Page 21
    Legal A4 U.S. Executive U.S. Statement 8.5 x 13 inch B5 A5 Cards Custom-sized media Photo media A6 Banner media Ofuku Hagaki Hagaki Card A3 A3+ B4 Super B Tabloid (1) Left margin (2) Right margin (3) Top margin (4) Bottom margin* 3.3 mm (0.13 inch) 3.3 mm (0.13 inch) 3.3 mm (0.13 inch) NOTE
  • HP CB016A | User Guide - Page 22
    inch) inch) * To achieve this margin setting on a computer running Windows, click the Advanced tab in the print driver, and select Minimize Margins. Load media This section provides instructions for loading media into the device. To load Tray 1 (main tray) 1. Lift the output tray. 2. Insert the
  • HP CB016A | User Guide - Page 23
    slot. For more information, see Print with the rear manual feed slot. 1. Raise the output tray and remove any media from the input tray. 2. Insert a stack of media that does not exceed the height of the paper guide, print- side down along the right side of the input tray until it stops
  • HP CB016A | User Guide - Page 24
    , the small media guide extends until it touches the edge of the media. 6. Lower the output tray. 7. When printing, select the appropriate media type and size from the printer driver. For more information, see Understand specifications for supported media. To load the rear manual feed slot 1. If
  • HP CB016A | User Guide - Page 25
    settings for all print jobs, make the changes in the printer driver. For more information about the features of the Windows printer driver, see the online help for the driver. For more information about printing from a specific application, see the documentation that came with the application. • To
  • HP CB016A | User Guide - Page 26
    does not appear in the HP Solution Center. If the HP Solution Center on your supported by the manual feed slots, see Understand specifications for supported media. Printing from the rear manual 1. Open the printer driver. 2. Click the Paper/Quality tab. 3. Select the manual feed option from the
  • HP CB016A | User Guide - Page 27
    printing accessory (duplexer), or manually by turning the media over specifications. For more information, see Understand specifications for supported media. • Specify duplex options in your application or in the printer driver media and pauses while the ink dries. Once the ink dries, the media is
  • HP CB016A | User Guide - Page 28
    on which way you want the binding. See the graphics in the print driver for examples. 8. Choose a booklet layout from the Booklet Layout drop-down for the new custom size. c. In the Width and Height boxes, type the dimensions, and then click Save. d. Click OK twice to close the properties or
  • HP CB016A | User Guide - Page 29
    the Paper Size Name box. c. In the Width and Height boxes, type the dimensions and set the margins, if desired. d. Click Done or OK, and then gain access to this feature from the Printing Shortcuts tab. Open the printer driver, select the Printing Shortcuts tab, and select the printing shortcut for
  • HP CB016A | User Guide - Page 30
    *Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting might are printing on thick or photo media, select the manual feed option. 10. Change any other print settings, to be processed. Windows: Double-click the printer icon that appears in the lower-right corner
  • HP CB016A | User Guide - Page 31
    , see Use device management tools. NOTE: Specific procedures might include other methods. Windows • Device control panel • Embedded Web server • Printer driver • HP Web Jetadmin NOTE: For more information about the HP Web Jetadmin software, open the HP Web Jetadmin software and see its documentation
  • HP CB016A | User Guide - Page 32
    Chapter 4 Monitor the device This section provides instructions for monitoring the device. Use this tool... Control panel Embedded Web server Toolbox (Windows) HP Printer Utility (Mac OS) to obtain the following information.... Obtain information about the status of jobs that are being processed,
  • HP CB016A | User Guide - Page 33
    ) HP Printer Utility (Mac OS) to do the following... • Order supplies: On any tab, click the Order Supplies button, and then follow the onscreen instructions. • Support: On any tab, click the Support button, and then select a support option. Perform device maintenance tasks: Click the Services tab
  • HP CB016A | User Guide - Page 34
    HP Printer Utility (Mac OS): On the Printer Support and Order Supplies buttons Contents Shows status information about the device, its ink Support provides a number of support services, including e-services such as HP Instant Support, myPrintMileage. For more information, see HP Instant Support
  • HP CB016A | User Guide - Page 35
    the HP Digital Imaging Monitor in the tray, point to the device, and then click Display Printer Toolbox. • From the Printer Properties, click Printing Preferences, Features or Color Tabs, and then select Printer Services. Toolbox tabs The Toolbox contains the following tabs. Tabs Estimated Ink
  • HP CB016A | User Guide - Page 36
    and click Launch Utility. HP Printer Utility panels This section covers the following topics: • Information and Support panel • Printer Settings panel Information and Support panel • Supplies Status: Shows the information about currently installed printheads and ink cartridges. • Supply Info: Shows
  • HP CB016A | User Guide - Page 37
    helps you quickly identify, diagnose, and resolve printing problems. HP Instant Support provides the following information about your device: • Easy access to troubleshooting tips: Provides tips that are customized for your device. • Resolution of specific device errors: Provides immediate access to
  • HP CB016A | User Guide - Page 38
    updates: Alerts you when there is an update for the printer driver. A message appears on the HP Instant Support homepage; click the link within the message to go directly to the download section of the HP Web site. • Managing ink and media usage (myPrintMileage): Helps you manage and forecast device
  • HP CB016A | User Guide - Page 39
    the self-test diagnostic page to view current device information, ink cartridge status, and printhead health status; to help troubleshoot problems; and to verify installation of optional accessories, such as the duplexer. If you need to call HP, it is often useful to print the self-test diagnostic
  • HP CB016A | User Guide - Page 40
    health and the part numbers, first-installation dates, and end-of-warranty dates of the printheads, as well as the accumulated ink usage. The status Services tab, and then click Print Self-Test Diagnostic Page. • HP Printer Utility (Mac OS): Click Device Information from the Information and Support
  • HP CB016A | User Guide - Page 41
    supports SNMPv1 protocol on IP networks. • The Windows Internet Naming Service (WINS) server provides Internet Protocol (IP) address and name resolution services install a printer driver on Windows 2000, Windows XP, Windows Vista, or Windows Server 2003. When setting up the device, HP recommends that
  • HP CB016A | User Guide - Page 42
    When setting up the device, HP recommends that you connect the the CD menu, click Install and follow the onscreen instructions. 4. When prompted, turn on the device and connect Hardware dialog box that displays methods for locating the printer driver, select the Advanced option, and then click Next
  • HP CB016A | User Guide - Page 43
    the onscreen instructions. 6. Click Printers. 2. Right-click the device icon, click Properties, and then click the Sharing tab. 3. Click the option to share the device, and give it a share name. 4. To share the device with client computers that use other versions of Windows, click Additional Drivers
  • HP CB016A | User Guide - Page 44
    can connect to the device in the following ways: • In the Printers folder, double-click the Add Printer icon and follow the instructions for a network installation. For more information, see To install the printer driver using Add Printer. • On the network, browse to the device and drag it to
  • HP CB016A | User Guide - Page 45
    or Windows Vista computer on a pure IPV6 network, follow these instructions to install the printer driver. NOTE: If you attempt to install the device software from create a local printer and select HP Standard TCP/IP Port. 5. When prompted, type the Stateless IPv6 address of the HP device printed on
  • HP CB016A | User Guide - Page 46
    Install Software and follow the onscreen instructions. 4. If necessary, share the software installed, and the driver or PPD for the device USB device sharing, see the support information on the Apple Web then check the box next to Share my printers with other computers. • Mac OS 10.4: Open System
  • HP CB016A | User Guide - Page 47
    select Print. e. From the drop-down menu next to Printer, select Shared Printers, and then select your device. f. Make additional settings, events to complete. 10. Follow the onscreen instructions. When the software installation is complete, the HP Digital Imaging Monitor icon appears in the Windows
  • HP CB016A | User Guide - Page 48
    reinstall the software, insert the device Starter CD into your computer's CD- ROM drive. 6. On the desktop, open the CD-ROM, and then double-click HP Installer. 7. Follow the onscreen instructions and also see To install the software for network or direct connection. 44 Configure and manage
  • HP CB016A | User Guide - Page 49
    Poor print quality and unexpected printouts • Solve paper-feed problems • Solve device management problems • Troubleshoot installation issues • Clear jams Supported ink cartridges The availability of ink cartridges varies by country/region. The ink cartridges might come in different sizes. To obtain
  • HP CB016A | User Guide - Page 50
    ink cartridge from its package. 4. Align the cartridge with its color ink cartridge cover. Maintain the printheads If printed characters are incomplete, or dots or lines are missing from printouts, ink nozzles might be clogged and you might need to clean the printheads. 46 Maintain and troubleshoot
  • HP CB016A | User Guide - Page 51
    problems persist after cleaning. For more information, see To replace the printheads. CAUTION: HP the printheads • To clean the printhead contacts manually • To replace the printheads To check printhead services to improve the print quality of your printouts. You can also view the ink level
  • HP CB016A | User Guide - Page 52
    5 • Toolbox (Windows): Click the Services tab, and then click Print PQ (print quality) diagnostic page and follow the onscreen instructions. • HP Printer Utility (Mac OS): Click Print Quality Diagnostics from the Information and Support panel. 1 Printer Information: Shows device information (such
  • HP CB016A | User Guide - Page 53
    Run Diagnostic. • Toolbox (Windows): Click the Services tab, and then click Align Printheads and follow the onscreen instructions. • HP Printer Utility (Mac OS): Click Align from the Information and Support panel. To clean the printhead contacts manually After the printheads are installed, one or
  • HP CB016A | User Guide - Page 54
    carriage moves to the left. Wait for the carriage to stop moving, and then unplug the power cord from the printer. 3. Lift the printhead latch. 4. Lift the handle of the printhead you want to replace and and pull the lens cleaning paper. CAUTION: Do not use water. 50 Maintain and troubleshoot
  • HP CB016A | User Guide - Page 55
    on the printhead but do not touch the nozzles. CAUTION: The electrical contacts are small copper-color squares, grouped on one face of the printhead. The nozzles are on a different face of the printhead. Ink will be visible on the nozzles. Touching the nozzles can cause permanent nozzle damage. Also
  • HP CB016A | User Guide - Page 56
    process manually. For more information, see To align the printheads. To replace the printheads NOTE: To find out which printheads work with your printer, see carriage to stop moving, and then unplug the power cord from the printer. 3. Lift the printhead latch. 4. Lift the handle of a printhead and
  • HP CB016A | User Guide - Page 57
    Do not shake printheads after the caps are removed. 7. Insert the printhead into its color-coded slot (the label on the printhead must match the label on the printhead latch). pages, start the alignment process manually. For more information, see To align the printheads. Maintain the printheads 53
  • HP CB016A | User Guide - Page 58
    power outlet, and is turned on. For voltage requirements, see Electrical specifications. ◦ Media is loaded correctly in the tray and is not jammed in the device. ◦ Printheads and ink cartridges are properly installed in their correct color-coded slots. Press down firmly on each one to ensure proper
  • HP CB016A | User Guide - Page 59
    cord, network cable, and USB cable), wait about 20 seconds, and reconnect the cables. If the problem persists, visit the HP Web site (www.hp.com/support) for the latest troubleshooting information, or product fixes and updates. The device is not responding (nothing prints) Check the print queue
  • HP CB016A | User Guide - Page 60
    environment Ensure the correct device driver and printer driver port are being used. problem communicating with the device, try temporarily disabling the firewall. If the problem persists, the firewall is not the source of the communication problem inserted into its correct color-coded slot. For more
  • HP CB016A | User Guide - Page 61
    in the device driver. For more information, see Change print settings. Blank or partial page printed Check for empty ink cartridges Check the (Windows), HP Printer Utility (Mac OS), and the self-test diagnostic page (see Understand the self-test diagnostic page) provide information about ink levels.
  • HP CB016A | User Guide - Page 62
    Check the color print settings Make sure Print in Grayscale is not selected in the printer driver. For is loaded Make sure the media width and length guides fit snugly against the edges of the stack of media printer driver match the size of media loaded in the tray. 58 Maintain and troubleshoot
  • HP CB016A | User Guide - Page 63
    settings in the printer driver. For more information above solutions do not work, the problem may be caused by the inability specific help. Device prints half a page, then ejects the paper Check the ink cartridges The ink cartridges may be low on ink, and the print job was cancelled. Replace the ink
  • HP CB016A | User Guide - Page 64
    and ink cartridges Print the print quality diagnostic page on a clean sheet of white paper. Evaluate any problem areas, supports the type of media you have loaded. For more information, see Understand specifications for supported media. • Make sure you have selected the tray in the print driver
  • HP CB016A | User Guide - Page 65
    printer driver, select the Best print quality, and also increase the ink drying time and reduce the ink saturation using the ink volume under the advanced features (Windows) or ink features (Mac OS). However, note that decreasing ink saturation might give printouts a "washed-out" quality. • Color
  • HP CB016A | User Guide - Page 66
    white paper. Evaluate any problem areas, and perform the recommended actions. For more information, see To print the print quality diagnostic page. Colors are printing as black and white Check the print settings Make sure Print in Grayscale is not selected in the printer driver. For information on
  • HP CB016A | User Guide - Page 67
    mode in the printer driver. For more information problem is occurring A paper-feed problem is occurring Media is not supported for the printer or tray Use only media that is supported for the device and the tray being used. For more information, see Understand specifications for supported the guides
  • HP CB016A | User Guide - Page 68
    is removable, pull out the tray from the device and reload the media properly, making sure that the paper guides are properly aligned. • Make sure the rear access panel or duplexer is properly installed. • Load media into is picked up more easily if the tray is full.) 64 Maintain and troubleshoot
  • HP CB016A | User Guide - Page 69
    to jam or pick multiple sheets at one time. • Use HP media for optimum performance and efficiency. • Do not load the paper when the carriage is moving. Solve device management problems This section provide solutions to common problems that involve managing the device. This section contains the
  • HP CB016A | User Guide - Page 70
    Troubleshoot installation issues If the following topics do not help, see Support and warranty for information about HP support. • Hardware installation suggestions • Software installation suggestions • Solve network problems ink cartridges • Make sure that all of the printheads and ink USB drivers
  • HP CB016A | User Guide - Page 71
    driver from the HP Web site (www.hp.com/support). NOTE: After correcting any problems, run the installation program again. Solve network problems General network troubleshooting address manually in Printers or Printers and Faxes. - Or Click Start, click Control Panel, and then double-click Printers
  • HP CB016A | User Guide - Page 72
    turn off the device before you remove any jam. • Make sure that you are printing with media that meets specifications. For more information, see Select print media. • Make sure that you are printing with media that is not with both hands and then pull it towards you. 68 Maintain and troubleshoot
  • HP CB016A | User Guide - Page 73
    . Tips for avoiding jams • Make sure that nothing is blocking the paper path. • Do not overload the trays. For more information, see Understand specifications for supported media. • Load paper properly and when the device is not printing. For more information, see Load media. • Do not use media that
  • HP CB016A | User Guide - Page 74
    • Always use media that conforms with specifications. For more information, see Select print media. • Make sure the output tray is not overly full. • Make sure media is aligned against the right side of a tray. • Make sure the media length and width guides are adjusted snugly against the media, but
  • HP CB016A | User Guide - Page 75
    The control-panel lights indicate status and are useful for diagnosing printing problems. This section contains information about the lights, what they indicate, 5 Resume button and light 6 Power button and light 7 Ink cartridge lights 8 Printhead lights Control-panel lights reference 71
  • HP CB016A | User Guide - Page 76
    Chapter 6 Visit the HP Web site (www.hp.com/support) for the latest troubleshooting information, or product fixes and updates. Light description/Light pattern All lights are off. Explanation and recommended action The device is off. • Connect the power
  • HP CB016A | User Guide - Page 77
    printing. One or more of the ink cartridges have expired. CAUTION: Device services or repairs required as a result of using expired ink cartridges will not be covered under warranty. • Replace the indicated ink cartridge. • If you choose to use the expired ink cartridge, press and hold (Power button
  • HP CB016A | User Guide - Page 78
    . • If the error persists, replace the indicated ink cartridge. One or more of the ink cartridges are low on ink and must be replaced before you can continue printing. Replace the indicated ink cartridge. For ordering information, see HP supplies and accessories. 74 Control-panel lights reference
  • HP CB016A | User Guide - Page 79
    cartridge a few times if necessary. • If the error persists, replace the indicated ink cartridge. One or more of the ink cartridges are low on ink and will need to be replaced soon. Get new ink cartridges and replace the existing cartridges when they become empty. The device is out of paper. Load
  • HP CB016A | User Guide - Page 80
    to the network. If the device is turned off, turn on the device. If the device is turned on and a network cable is connected, see Troubleshoot installation issues. 76 Control-panel lights reference
  • HP CB016A | User Guide - Page 81
    button from any page in the embedded Web server. • Toolbox (Windows): On the Estimated Ink Level tab, click Shop Online. • HP Printer Utility (Mac OS): Click Supplies Status from the Information and Support panel, click the Shop for HP Supplies drop-down menu, and then choose Online. Accessories
  • HP CB016A | User Guide - Page 82
    Ink Levels tab, scroll to display the Cartridge Details button, and then click Cartridge Details. • Mac OS: From the HP Printer Utility, click Supply Info from the Information and Support panel, and then click Retail Supplies Information. Printheads HP 88 Black and Yellow Officejet Printhead HP
  • HP CB016A | User Guide - Page 83
    B Support and warranty The information in Maintain and troubleshoot suggests solutions to common problems. If your device is not operating correctly and those suggestions did not solve your problem, try using one of the following support services to obtain assistance. This section contains the
  • HP CB016A | User Guide - Page 84
    Appendix B Hewlett-Packard limited warranty statement 80 Support and warranty
  • HP CB016A | User Guide - Page 85
    contains the following topics: • Before you call • Support process • HP support by phone • Additional warranty options • HP Quick Exchange Service (Japan) Before you call Visit the HP Web site (www.hp.com/support) for the latest troubleshooting information, or product fixes and updates. To assist
  • HP CB016A | User Guide - Page 86
    online support specialists • Software and driver updates for the HP Printer • Valuable HP Printer and troubleshooting information for common problems • Proactive device updates, support alerts, and HP newsgrams that are available when you register the HP Printer 3. Call HP support. Support options
  • HP CB016A | User Guide - Page 87
    plans are available for the HP Printer at additional costs. Go to www.hp.com/ support, select your country/region and language, then explore the services and warranty area for information about the extended service plans. HP Quick Exchange Service (Japan) For instructions on how to pack your
  • HP CB016A | User Guide - Page 88
    manually slide the print carriage to the far right side to remove the ink cartridges. 2. Gently pull open the ink cartridge cover. 3. Remove the ink with the device unless the HP customer support call agent instructs you to. 5. Close the ink cartridge door and wait printer. 84 Support and warranty
  • HP CB016A | User Guide - Page 89
    in an airtight plastic container so they will not dry out, and put them aside. Do not send them with the device unless the HP customer support call agent instructs you to. 6. Close the cover. 7. Press the Power button to turn off the device. Pack the device Complete the following steps after you
  • HP CB016A | User Guide - Page 90
    Include the following items in the box: • A complete description of symptoms for service personnel (samples of print quality problems are helpful). • A copy of the sales slip or other proof of purchase to establish the warranty coverage period. • Your name, address, and a phone number where you can
  • HP CB016A | User Guide - Page 91
    rear of the device. Device weight (does not include printing supplies) • Device: 11.9 kg (26.3 lb) • With Duplexer: Adds 2.5 kg (5.6 lb) Product features and capacities Feature Connectivity Print method Ink cartridges Printheads Supply yields Device languages Font support Duty cycle Control panel
  • HP CB016A | User Guide - Page 92
    specifications printer driver for Windows Server 2003 (both 32-bit and 64-bit versions) requires a minimum of an Intel® Pentium® II or Intel Celeron® processor, 128 MB RAM, 200 MB free hard disk space. The driver is available at http://www.hp.com/support/. Minimum requirements • Windows 2000 Service
  • HP CB016A | User Guide - Page 93
    EM64T support, or Intel Pentium 4 processor with Intel EM64T support, 256 space Network protocol specifications Network operating Services with Citrix Metaframe XP with Feature Release 3 • Novell Netware 6, 6.5, Open Enterprise Server 6.5 Compatible network protocols TCP/IP Network management • HP
  • HP CB016A | User Guide - Page 94
    Appendix C Embedded Web server specifications Requirements • A TCP/IP-based network (IPX/SPX-based networks are not supported) • A Web browser ink Color HP enhanced photo quality (up to 4800 by 1200 dpi Optimized on HP Premium Plus photo papers with 1200 x 1200 input dpi) Environmental specifications
  • HP CB016A | User Guide - Page 95
    Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779) Sound pressure (bystander position) LpAd 55 (dBA) Sound power LwAd 6.7 (BA) Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779) 91
  • HP CB016A | User Guide - Page 96
    D Regulatory information This section contains the following topics: • FCC statement • Notice to users in Korea • VCCI (Class B) compliance statement for users in Japan • Notice to users in Japan about the power cord • RoHS notices (China only) • LED indicator statement • Regulatory model number •
  • HP CB016A | User Guide - Page 97
    Notice to users in Korea VCCI (Class B) compliance statement for users in Japan Notice to users in Japan about the power cord RoHS notices (China only) The device meets product requirements from regulatory agencies in your country/region. RoHS notices (China only) 93
  • HP CB016A | User Guide - Page 98
    assigned a Regulatory Model Number. The Regulatory Model Number for your product is SNPRC-0704. This regulatory number should not be confused with the marketing name (HP Officejet Pro K8600 Printer series) or product number (CB015A, CB016A). 94 Regulatory information
  • HP CB016A | User Guide - Page 99
    Declaration of conformity Declaration of conformity 95
  • HP CB016A | User Guide - Page 100
    locate, access, and remove using common tools. High priority parts have been designed to access quickly for efficient disassembly and repair. For more information, visit HP's Commitment to the Environment Web site at: www.hp.com/hpinfo/globalcitizenship/environment/index.html This section contains
  • HP CB016A | User Guide - Page 101
    Disposal of waste equipment by users in private households in the European Union Environmental product stewardship program 97
  • HP CB016A | User Guide - Page 102
    26 capacity trays 16 cards guidelines 12 sizes supported 14 tray supporting 16 cartridges. See ink cartridges clean printheads 49 colors bleeding 62 faded or dull 61 print black and white, troubleshoot 62 specifications 90 troubleshoot 63 wrong 62 connectors, locating 8 control panel illustration
  • HP CB016A | User Guide - Page 103
    Index HP Web Jetadmin about 33 humidity specifications 90 I Information tab, Toolbox (Windows) 31 ink cartridges estimated ink levels 36 expiration dates 36 lights 71 order online 77 part numbers 36, 77 remove 83 replace 45 status 28 supported 45, 87 warranty 80 yields 87 ink smearing, troubleshoot
  • HP CB016A | User Guide - Page 104
    , check 47 health, status 36 ink usage 36 lights 71 maintaining 46 order online 77 part numbers 36, 78 remove 83 replace 52 status 28, 47 supported 87 troubleshoot 56 warranty 80 privacy, HP Instant Support 34 processor specifications 88 Q quality, troubleshoot diagnostic page 47 print 59 R readme
  • HP CB016A | User Guide - Page 105
    problems 63 power 55 print 55 print quality 59 printheads 56 skewed pages 64 slow print 57 tips 54 troubleshooting lights 71 troubleshooting specifications 87 V voltage specifications 90 W warranty 80, 83 Web sites accessibilty information 7 Apple 42 customer support 81 environmental programs 96 HP
  • HP CB016A | User Guide - Page 106
    102
  • HP CB016A | User Guide - Page 107
  • HP CB016A | User Guide - Page 108
    © 2009 Hewlett-Packard Development Company, L.P. www.hp.com/support Podręcznik użytkownika
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

HP Officejet Pro K8600 Printer series
User Guide