HP Chromebook 11 G9 Education Edition Maintenance and Service Guide - Page 44

Remove the Phillips M2.0 × 2.9 screw

Get HP Chromebook 11 G9 Education Edition PDF manuals and user guides View all HP Chromebook 11 G9 Education Edition manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

NOTE: Computer models have either one or two WLAN antennas. On models with two antennas, the #1 white WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna cable connects to the WLAN module #1 Aux terminal. 2. Remove the Phillips M2.0 × 2.9 screw (2) that secures the WLAN module bracket and WLAN module to the system board. 3. Remove the WLAN module bracket (3). The WLAN module bracket is available using spare part number M00452-001. 4. Remove the WLAN module (4). 5. If the WLAN antenna is not connected to the terminal on the WLAN module, install a protective sleeve on the antenna connector, as shown in the following illustration. Reverse this procedure to install the WLAN module. 36 Chapter 5 Removal and replacement procedures for authorized service provider parts ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
NOTE:
Computer models have either one or two WLAN antennas. On models with two antennas, the #1
white WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna
cable connects to the WLAN module #1 Aux terminal.
2.
Remove the Phillips M2.0 × 2.9 screw
(2)
that secures the WLAN module bracket and WLAN module to the
system board.
3.
Remove the WLAN module bracket
(3)
.
The WLAN module bracket is available using spare part number M00452-001.
4.
Remove the WLAN module
(4)
.
5.
If the WLAN antenna is not connected to the terminal on the WLAN module, install a protective sleeve on
the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
36
Chapter 5
Removal and replacement procedures for authorized service provider parts
ENWW